Avalon P264SC-1 Stainless Steel Proofing Cabinet Single Door
Avalon Proofing Cabinets are available in both Stainless Steel and Aluminum. All doors, inside racks, supports and heater units are totally removable without tools. The heater/humidity control unit has all exterior-mounted controls allowing the operator to adjust settings without opening the door. The door is 3/16" thick impact-resistant clear poly-carbonate panel sealed to heavy-duty stainless steel or aluminum mitered frame. These units come standard on heavy-duty casters (2) with locking brakes. (Accommodates a wide variety of screens and pans).
About Avalon
Since 1927 Avalon has been a premier U.S. manufacturer of quality donut and bakery equipment. The company is family-owned and operated with a mission to be the preferred global supplier and the highest quality, value-based equipment in the donut equipment sector.
Product Features
Aluminum
Stainless Steel Shelving - 16
5" Casters (2) with Locks
3/16" Clear Viewing Panel
Removable Heating Unit
Easy to Use Controls
Accepts a Variety of Screens
Dimensions: 28"W x 31"D x 70"H
Electrical: 120V / 50-60HZ / 1-PH 20 AMPS (Optional 230V)
Apx Shipping Weight: 350 LBS.
Disclaimer
*This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary.
* 1-year parts and labor cost limited warranty
Avalon Proofing Cabinets are available in both Stainless Steel and Aluminum. All doors, inside racks, supports and heater units are totally removable without tools. The heater/humidity control unit has all exterior-mounted controls allowing the operator to adjust settings without opening the door. The door is 3/16" thick impact-resistant clear poly-carbonate panel sealed to heavy-duty stainless steel or aluminum mitered frame. These units come standard on heavy-duty casters (2) with locking brakes. (Accommodates a wide variety of screens and pans).
Product Features
Aluminum
Stainless Steel Shelving - 16
5" Casters (2) with Locks
3/16" Clear Viewing Panel
Removable Heating Unit
Easy to Use Controls
Accepts a Variety of Screens
P264AC-1 (ALUMINUM 1-DOOR)
Dimensions: 28"W X 31"D X 70"H
Electrical: 120V / 50-60HZ / 1-PH 20 AMPS ( Optional 230V)
Apx Shipping Weight: 300 LBS.
Aluminum construction with universal extruded pan supports accommodate a variety of pans and screens. Full-length Lexan ® door with heavy duty hinges, positive closing latch and perimeter gasket. Bottom mounted electrical unit with separate controls for heat and humidity. Cast-in humidity system prevents element burnout and potential injury from accidental contact with exposed heating element. Self-draining feature collects excess moisture into a standard bun pan (not included) below the base of cabinet.
Mobile, full height with insulated top, back & sides.
* (1) Left Hand Hinged Door (Right Hinged Photo,Photo Left Hinged Unavailable)
208-230v/50/60/1-ph. 1400 watts. 7.5/6.8 amps. Cord only. CULus. NSF.
Construction:
Body: .063 aluminum
Door: Clear Lexan ® with an extruded aluminum frame
Door Latch and Hinges: Patented positive action door latch with heavy-duty stainless steel hinges
Door Gasket: Closed cell foam
Base: .125 aluminum
Rear (Air Duct) Panel: .063 aluminum Pan Support Assembly:
Pan Supports: Extruded universal pan supports adjustable on 3" centers
Uprights: .100 aluminum slotted on 3" centers Electrical:
Switch: 15 Amp, lighted
Bottom mounted heating unit with a one (1) piece modular drop-in design blower assembly
Entire bottom mounted heating unit is easily removable for cleaning and maintenance
Air heating element rated at 1000W, 120V
Humidity heating element rated at 400W, 120V 5 quart (4.7 liter) cast water reservoir
Lexan ® water reservoir cover Easy to operate controls feature precision thermostat, variable humidity control and dial thermometer
All controls are visible and operable from exterior of cabinet Casters:
Heavy-duty plate type casters, with 5" hard neoprene wheels; all swivel; wheel brakes on front two casters
Shipping:
Freight Class: 85
17-shelf cabinet proofer with 'Dutch' Doors, specialized for donuts.
Replaces the EP18-24 proofer.
Belshaw's CP cabinet proofer is designed for quality, dependability and convenience, for proofing all baked goods.
The CP proofer is a robust mobile cabinet proofer that can be rolled into any convenient position for loading or unloading
Two insulated 'Dutch' doors provide the best solution for efficient use while retaining warm air in the chamber.
STANDARD FEATURES
17 shelf layout, for high donut capacity.
Compatible with both large and small donut screens.
'Dutch' doors with insulating gasket to retail heat and humidity.
Transparent viewing windows, to check how donuts are progressing.
Easily adjustable temperature and humidity dial controls.
Full time temperature display that you can monitor anytime.
Improved moisture management and moisture collection system.
Improved manual water fill.
Autowater option.
• Certified to NSF-4, UL-197 and CSA 22.2 OPTIONS
• 120 V, 60 Hz, 1 ph ; 12 A, 1440 W
• Autowater system (field installed accessory).
17-shelf cabinet proofer with 'Dutch' Doors, specialized for donuts.
Replaces the EP18-24 proofer.
Belshaw's CP cabinet proofer is designed for quality, dependability and convenience, for proofing all baked goods.
The CP proofer is a robust mobile cabinet proofer that can be rolled into any convenient position for loading or unloading
Two insulated 'Dutch' doors provide the best solution for efficient use while retaining warm air in the chamber.
STANDARD FEATURES
17 shelf layout, for high donut capacity.
Compatible with both large and small donut screens.
'Dutch' doors with insulating gasket to retail heat and humidity.
Transparent viewing windows, to check how donuts are progressing.
Easily adjustable temperature and humidity dial controls.
Full time temperature display that you can monitor anytime.
Improved moisture management and moisture collection system.
Improved manual water fill.
Autowater option.
• Certified to NSF-4, UL-197 and CSA 22.2 OPTIONS
• 208-240 Volts, 50-60 hz, 1-phase 5.5-6.0 A, 1210-1440 W
• Autowater system (field installed accessory).
COMPATIBILITY
Compatible with 618L, 624, 718L, 724 and Mark VI fryers.Also compatible with 616B and Mark II/Mark V, withSL200-0004 screens for shelf support.
Avalon Proofing Cabinets are available in both Stainless Steel and Aluminum. All doors, inside racks, supports and heater units are totally removable without tools. The heater/humidity control unit has all exterior-mounted controls allowing the operator to adjust settings without opening the door. The door is 3/16" thick impact-resistant clear poly-carbonate panel sealed to heavy-duty stainless steel or aluminum mitered frame. These units come standard on heavy-duty casters (2) with locking brakes. (Accommodates a wide variety of screens and pans).
Product Features
Aluminum
Stainless Steel Shelving - 16
5" Casters (2) with Locks
3/16" Clear Viewing Panel
Removable Heating Unit
Easy to Use Controls
Accepts a Variety of Screens
P264AC-2 (ALUMINUM 2-DOOR)
Dimensions: 28"W X 31"D X 70"H
Electrical: 120V / 50-60HZ / 1-PH 20 AMPS (Optional 230V)
Apx Shipping Weight: 300 LBS.
Cozoc HPC 7011 Heater/Proofer Cabinet, 1500 WattsThis full size cabinet provides the ability to proof a variety of baked goods and allow them to rise before baking. The adjustablethermostat enables the chef to choose a variety of temperatures so that the cabinet can also be used as a warming cabinet for avariety of foods. Rack 2-3/4" apart.FEATURES:
Designed for proofing and heating
Designed for;
18" x 26" or 17" x 25" fry screens
12" X 20"
16" x 20"
14" x 18"
Holds up to 18" Pizza Box
Holds Full size Sheet Pans
Adjustable thermostat allows a variety of warming temperatures
Timer notifies user when process is complete
Water pan in base provides moisture for proofing
Humidity from 30% to 95%, temperature up to 185F.
Total pan capacity is 18 pieces (18" x26" )
Clear glass door provides easy visibility
Contains four safety-lock casters for easy mobility
Construction: Aluminum cabinet
One year limited manufacturers warranty
SPECIFICATIONS: Approvals: ETLElectrical: 1500 WattsOptions: LED ThermometerDimensions: 24 1/2" W x 32 D x 69 3/4" HNet Weight: 115 pounds
Aluminum construction with universal extruded pan supports accommodate a variety of pans and screens. Full-length Lexan ® door with heavy duty hinges, positive closing latch and perimeter gasket. Bottom mounted electrical unit with separate controls for heat and humidity. Cast-in humidity system prevents element burnout and potential injury from accidental contact with exposed heating element. Self-draining feature collects excess moisture into a standard bun pan (not included) below the base of cabinet.
Mobile, full height with insulated top, back & sides.
* (2) Two Left Hinged Doors (Right Hinged Photo,Photo Left Hinged Unavailable)
208-230v/50/60/1-ph. 1400 watts. 7.5/6.8 amps. Cord only. CULus. NSF.
Construction:
Body: .063 aluminum
Door: Clear Lexan ® with an extruded aluminum frame
Door Latch and Hinges: Patented positive action door latch with heavy-duty stainless steel hinges
Door Gasket: Closed cell foam
Base: .125 aluminum
Rear (Air Duct) Panel: .063 aluminum Pan Support Assembly:
Pan Supports: Extruded universal pan supports adjustable on 3" centers
Uprights: .100 aluminum slotted on 3" centers Electrical:
Switch: 15 Amp, lighted
Bottom mounted heating unit with a one (1) piece modular drop-in design blower assembly
Entire bottom mounted heating unit is easily removable for cleaning and maintenance
Air heating element rated at 1000W, 120V
Humidity heating element rated at 400W, 120V 5 quart (4.7 liter) cast water reservoir
Lexan ® water reservoir cover
Easy to operate controls feature precision thermostat, variable humidity control and dial thermometer
All controls are visible and operable from exterior of cabinet Casters:
Heavy-duty plate type casters, with 5" hard neoprene wheels; all swivel; wheel brakes on front two casters
Shipping:
Freight Class: 85
Aluminum construction with universal extruded pan supports accommodate a variety of pans and screens. Full-length Lexan® door with heavy duty hinges, positive closing latch and perimeter gasket. Bottom mounted electrical unit with separate controls for heat and humidity. “Cast-in” humidity system prevents element burnout and potential injury from accidental contact with exposed heating element. Self-draining feature collects excess moisture into a standard bun pan (not included) below the base of cabinet.
Mobile, full height with insulated top, back & sides.
* (3) Right Hand Hinged Door
extra deep to accommodate 23" x 32" fry screens
accommodates 16 (23" x 23" fry screens)
. 120v/60/1-ph. 1400 watts. 13 amps. 8' cord & NEMA 5-15P plug. CULus. NSF.
Construction:
• Body: .063 aluminum
• Door: Clear Lexan® with an extruded aluminum frame
• Door Latch and Hinges: Patented positive action door latch with heavy-duty stainless steel hinges
• Door Gasket: Closed cell foam
• Base: .125 aluminum
• Rear (Air Duct) Panel: .063 aluminum Pan Support Assembly:
• Pan Supports: Extruded universal pan supports adjustable on 3" centers
• Uprights: .100 aluminum slotted on 3" centers Electrical:
• Switch: 15 Amp, lighted
• Bottom mounted heating unit with a one (1) piece modular drop-in design blower assembly
• Entire bottom mounted heating unit is easily removable for cleaning and maintenance
• Air heating element rated at 1000W, 120V
• Humidity heating element rated at 400W, 120V • 5 quart (4.7 liter) cast water reservoir
• Lexan® water reservoir cover • Easy to operate controls feature precision thermostat, variable humidity control and dial thermometer
• All controls are visible and operable from exterior of cabinet Casters:
• Heavy-duty plate type casters, with 5" hard neoprene wheels; all swivel; wheel brakes on front two casters
Shipping:
• Freight Class: 85
BevLes Extra Deep Proofing Cabinet Mobile Full Height Non-Insulated - PICA70-32-AED-1L3
Mobile, full height, non-insulated cabinet. (3) clear Lexan® left-hand hinged split doors. Digital thermostat. 120v/60/1-ph. 1400 watts. 13 amps. 8' cord & NEMA 5-15P plug. CULus. NSF.
Dimensions (Inches): Width 29. Height: 71.5. Depth: 39.
Insulation: non-insulated
Interior Finish: aluminum interior
Exterior Finish: all aluminum exterior
Sections: 1 section w/1 compartment
Heater: bottom mounted heater
Slide Centers: adjustable centers on 1-1/2"
Full Size Hotel Pan Capacity: (32) 12" x 20" pans
Full Size Sheet Pan Capacity: (16) 18" x 26" pans
Category: Mobile Proofer Cabinet
Aluminum construction with universal extruded pan supports accommodate a variety of pans and screens. Full-length Lexan® door with heavy duty hinges, positive closing latch and perimeter gasket. Bottom mounted electrical unit with separate controls for heat and humidity. “Cast-in” humidity system prevents element burnout and potential injury from accidental contact with exposed heating element. Self-draining feature collects excess moisture into a standard bun pan (not included) below the base of cabinet.
Mobile, full height with insulated top, back & sides.
* (2) Right Hand Hinged Door
. 120v/60/1-ph. 1400 watts. 13 amps. 8' cord & NEMA 5-15P plug. CULus. NSF.
16- (23 x 23) fry screens or 17" x 25" fry screens or full size sheet pans
Construction:
• Body: .063 aluminum
• Door: Clear Lexan® with an extruded aluminum frame
• Door Latch and Hinges: Patented positive action door latch with heavy-duty stainless steel hinges
• Door Gasket: Closed cell foam
• Base: .125 aluminum
• Rear (Air Duct) Panel: .063 aluminum Pan Support Assembly:
• Pan Supports: Extruded universal pan supports adjustable on 3" centers
• Uprights: .100 aluminum slotted on 3" centers Electrical:
• Switch: 15 Amp, lighted
• Bottom mounted heating unit with a one (1) piece modular drop-in design blower assembly
• Entire bottom mounted heating unit is easily removable for cleaning and maintenance
• Air heating element rated at 1000W, 120V
• Humidity heating element rated at 400W, 120V • 5 quart (4.7 liter) cast water reservoir
• Lexan® water reservoir cover • Easy to operate controls feature precision thermostat, variable humidity control and dial thermometer
• All controls are visible and operable from exterior of cabinet Casters:
• Heavy-duty plate type casters, with 5" hard neoprene wheels; all swivel; wheel brakes on front two casters
Shipping:
• Freight Class: 85
Aluminum construction with universal extruded pan supports accommodate a variety of pans and screens. Full-length Lexan® door with heavy duty hinges, positive closing latch and perimeter gasket. Bottom mounted electrical unit with separate controls for heat and humidity. “Cast-in” humidity system prevents element burnout and potential injury from accidental contact with exposed heating element. Self-draining feature collects excess moisture into a standard bun pan (not included) below the base of cabinet.
Mobile, full height with insulated top, back & sides.
* Right Hand Hinged Door
208-230v/50/60/1-ph, 1400 watts, 7.5/6.8 amps, cord only, cULus, NSF.
Construction:
• Body: .063 aluminum
• Door: Clear Lexan® with an extruded aluminum frame
• Door Latch and Hinges: Patented positive action door latch with heavy-duty stainless steel hinges
• Door Gasket: Closed cell foam
• Base: .125 aluminum
• Rear (Air Duct) Panel: .063 aluminum Pan Support Assembly:
• Pan Supports: Extruded universal pan supports adjustable on 3" centers
• Uprights: .100 aluminum slotted on 3" centers Electrical:
• Switch: 15 Amp, lighted
• Bottom mounted heating unit with a one (1) piece modular drop-in design blower assembly
• Entire bottom mounted heating unit is easily removable for cleaning and maintenance
• Air heating element rated at 1000W, 120V
• Humidity heating element rated at 400W, 120V • 5 quart (4.7 liter) cast water reservoir
• Lexan® water reservoir cover • Easy to operate controls feature precision thermostat, variable humidity control and dial thermometer
• All controls are visible and operable from exterior of cabinet Casters:
• Heavy-duty plate type casters, with 5" hard neoprene wheels; all swivel; wheel brakes on front two casters
Shipping:
• Freight Class: 85
Aluminum construction with universal extruded pan supports accommodate a variety of pans and screens. Full-length Lexan® door with heavy duty hinges, positive closing latch and perimeter gasket. Bottom mounted electrical unit with separate controls for heat and humidity. “Cast-in” humidity system prevents element burnout and potential injury from accidental contact with exposed heating element. Self-draining feature collects excess moisture into a standard bun pan (not included) below the base of cabinet.
Mobile, full height with insulated top, back & sides.
* Right Hand Hinged Door
. 120v/60/1-ph. 1400 watts. 13 amps. 8' cord & NEMA 5-15P plug. CULus. NSF.
Construction:
• Body: .063 aluminum
• Door: Clear Lexan® with an extruded aluminum frame
• Door Latch and Hinges: Patented positive action door latch with heavy-duty stainless steel hinges
• Door Gasket: Closed cell foam
• Base: .125 aluminum
• Rear (Air Duct) Panel: .063 aluminum Pan Support Assembly:
• Pan Supports: Extruded universal pan supports adjustable on 3" centers
• Uprights: .100 aluminum slotted on 3" centers Electrical:
• Switch: 15 Amp, lighted
• Bottom mounted heating unit with a one (1) piece modular drop-in design blower assembly
• Entire bottom mounted heating unit is easily removable for cleaning and maintenance
• Air heating element rated at 1000W, 120V
• Humidity heating element rated at 400W, 120V • 5 quart (4.7 liter) cast water reservoir
• Lexan® water reservoir cover • Easy to operate controls feature precision thermostat, variable humidity control and dial thermometer
• All controls are visible and operable from exterior of cabinet Casters:
• Heavy-duty plate type casters, with 5" hard neoprene wheels; all swivel; wheel brakes on front two casters
Shipping:
• Freight Class: 85
Aluminum construction with universal extruded pan supports accommodate a variety of pans and screens. Full-length Lexan® door with heavy duty hinges, positive closing latch and perimeter gasket. Bottom mounted electrical unit with separate controls for heat and humidity. “Cast-in” humidity system prevents element burnout and potential injury from accidental contact with exposed heating element. Self-draining feature collects excess moisture into a standard bun pan (not included) below the base of cabinet.
Mobile, full height with insulated top, back & sides.
* (1) Left Hand Hinged Door (Photo Is Right Hinge, Left Hinge was not available)
. 120v/60/1-ph. 1400 watts. 13 amps. 8' cord & NEMA 5-15P plug. CULus. NSF.
Construction:
• Body: .063 aluminum
• Door: Clear Lexan® with an extruded aluminum frame
• Door Latch and Hinges: Patented positive action door latch with heavy-duty stainless steel hinges
• Door Gasket: Closed cell foam
• Base: .125 aluminum
• Rear (Air Duct) Panel: .063 aluminum Pan Support Assembly:
• Pan Supports: Extruded universal pan supports adjustable on 3" centers
• Uprights: .100 aluminum slotted on 3" centers Electrical:
• Switch: 15 Amp, lighted
• Bottom mounted heating unit with a one (1) piece modular drop-in design blower assembly
• Entire bottom mounted heating unit is easily removable for cleaning and maintenance
• Air heating element rated at 1000W, 120V
• Humidity heating element rated at 400W, 120V • 5 quart (4.7 liter) cast water reservoir
• Lexan® water reservoir cover • Easy to operate controls feature precision thermostat, variable humidity control and dial thermometer
• All controls are visible and operable from exterior of cabinet Casters:
• Heavy-duty plate type casters, with 5" hard neoprene wheels; all swivel; wheel brakes on front two casters
Shipping:
• Freight Class: 85
Avalon P34SC-2 Stainless Steel 24" x 34" Proofing Cabinet Double Door
Avalon Proofing Cabinets are available in Stainless Steel. All doors, inside racks, supports and heater units are totally removable without tools. The heater/humidity control unit has all exterior-mounted controls allowing the operator to adjust settings without opening the door. The door is a 3/16" thick impact-resistant clear poly-carbonate panel sealed to heavy-duty stainless steel. These units come standard on heavy-duty casters (2) with locking brakes. (Accommodates a wide variety of screens and pans).
About Avalon
Since 1927 Avalon has been a premier U.S. manufacturer of quality donut and bakery equipment. The company is family-owned and operated with a mission to be the preferred global supplier and the highest quality, value-based equipment in the donut equipment sector.
Product Features
Stainless Steel
Stainless Steel Shelving - 16
5" Casters (2) with Locks
3/16" Clear Viewing Panel
Removable Heating Unit
Easy to Use Controls
Accepts a Variety of Screens designed for the 24" x 34" fry screen
120v/60HZ/1PH./20 AMPS
APX Shipping Weight 250LBS.
Dimensions 28"W x 41"D X 70"H
Disclaimer
*This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary.
* 1-year parts and labor cost limited warranty
Avalon P264SC-2 Stainless Steel Proofing Cabinet Double Door
Avalon Proofing Cabinets are available in both Stainless Steel and Aluminum. All doors, inside racks, supports and heater units are totally removable without tools. The heater/humidity control unit has all exterior-mounted controls allowing the operator to adjust settings without opening the door. The door is a 3/16" thick impact-resistant clear poly-carbonate panel sealed to heavy-duty stainless steel or aluminum mitered frame. These units come standard on heavy-duty casters (2) with locking brakes. Can fit 16 pans on its stainless steel shelves. (Accommodates a wide variety of screens and pans).
About Avalon
Since 1927 Avalon has been a premier U.S. manufacturer of quality donut and bakery equipment. The company is family-owned and operated with a mission to be the preferred global supplier and the highest quality, value-based equipment in the donut equipment sector.
Product Features
Aluminum
Stainless Steel Shelving - 16
5" Casters (2) with Locks
3/16" Clear Viewing Panel
Removable Heating Unit
Easy to Use Controls
Accepts a Variety of Screens
Dimensions: 28"W x 31"D x 70"H
Electrical: 120V / 50-60HZ / 1-PH 20 AMPS (Optional 230V)
Apx Shipping Weight: 350 LBS
Disclaimer
*This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary.
* 1-year parts and labor cost limited warranty
Bakemax BMDDD Description
Intended to perfect dough prior to baking, the Bakemax BMDDD proofing cabinet is meant to be added to BMS series ovens. It's versatile enough for use in single-, double-, or triple-deck ovens, and users can control temperatures with the built-in dial located on the unit's side. Its two-section layout accommodates high volumes of breads; operators have full access to product via its reach-in structure. To reduce temperature fluctuations, it has two full doors that protect product.
Product Details
For use with single-, double-, or triple-deck BMD series ovens
Reach-in design
2-section layout
Side control dial
2 full doors
Electric
From The Manufacturer
Proofer, for BMDDD series ovens
*Image may not depict product color, inclusions or accessories.
Resources
Bakemax BMDDD Specifications
Spec Attribute
Spec Value
Manufacturer
Bakemax
Application
Heat & Humidity
Controls
Dial
Door Design
Full
For Use With
BMDDD
Heat
Electric
Sections
2
Warranty
1 year limited parts & labor
Control Location
Side
Load Type
Reach In
No. of Doors
2
Product
Proofing Cabinets
Product Type
Food Warming Equipment
Weight
150.00