Belshaw Belshaw Mochi or Krinkle Plunger for Type B/F $850.00 $954.50
For 8-section Krinkle and 'Pon De Ring' donuts. The Krinkle plunger makes 8-section donuts that are irresistible whether packaged or in a display case! This plunger is also be used for 'Pon De Ring' donuts with Mochi rice flour mix. You will need a cylinder of the same size as your plunger. If you have two plungers of the same size, you only need one cylinder. Plunger sizes, diameter (inches) 1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2 Plunger sizes, diameter (mm) 38.1, 41.3, 44.5, 47.6 or 50.8 All plungers have a six week lead time from order date.
Belshaw Belshaw Manual Shortening Filter-Flo $410.00 $475.00
The Filter-Flo is a dependable heavy duty siphon that extracts and filters shortening from fryers, in situations where there is no room for a built-in drain, or if your fryer has no built-in drain. A squeeze of the large bulb starts the flow which can empty a Mark II in a few minutes. A reusable cloth filter cleans as the liquid passes through. Note: the Filter-Flo requires a customer-supplied leak proof container for filtered shortening to pour into. Filter-Flo is not needed if you already have a shortening filter such as SF or EZMelt. Belshaw Adamatic Filter-Flo Siphon [DR42-1048] is perfect for your establishment.
Belshaw Belshaw Filter Bag for the SF18/ SF24/ EZMelt 18/ EZMelt 24 $138.00 $155.25
The bag is supplied standard with new Filtration Systems but it is wise to have a backup. This is also the replacement after your filter's First Year. Polypropylene filter bag designed for one year of use under normal conditions if properly handled. Belshaw Adamatic Replacement Filter Bag only, Standard [SM100-0002] is perfect for your establishment. For the SF18 / SF24 / EZMelt 18 / EZMelt 24
Belshaw Cylinder for Type B/F $325.00 $460.00
CYLINDER FOR TYPE B/F Your cylinder is the same size diameter as the plunger, and is clamped at the bottom of your Type B or Type F depositor. Each plunger must be used with a cylinder of the same size (diameter). If you have two different plungers of the same size, they can use the same cylinder. If you order a Type B or Type F depositor, both the plunger and the cylinder must be ordered separately. There is no standard plunger or standard cylinder supplied with your depositor. It saves time and expense to have all plungers the same size. The most common plunger and cylinder size is 1¾" (45 mm). But donuts are becoming supersized, along with other foods!
Belshaw 23" x 23" Screen With Handles made by Belshaw $377.12 $405.50
23" x 23" Screen With Handles made by Belshaw Screens with bolt-on handles. These are for cake donuts only. (Two screens are supplied standard with each new floor model fryer). These stainless steel screens allow for quick release of cake donut batter and make the frying process easier. Quickly remove the finished product from the fryer and move to the glazer using the handles that are designed to stay cool in the fryer. The reinforced woven screen is both durable and constructed of quality materials by Belshaw. Belshaw Adamatic by Unisource Frying Screen with Handles for 624/724 Fryers 23" x 23" is perfect for your establishment. Wire mesh, nickel plated steel, welded.
Belshaw Belshaw Manual Shortening Filter-Flo Siphon Cloth Filters (dozen) $128.00 $150.00
12 cone-shaped filters for your Filter Flo Siphon. Belshaw Adamatic Cloth Filter Cones for Filter-Flo [DR42-0277DZ] is perfect for your establishment
Belshaw TYPE K HUSHPUPPY DEPOSITOR from $600.00 $690.00
TYPE K HUSHPUPPY DEPOSITOR The easiest way to deposit Southern Fried Hushpuppies with smaller fryers. Belshaw's Type K Hushpuppy Depositor is ideal for depositing Southern Fried Hushpuppies with smaller fryers such as Belshaw's 616B. The Type K is quick and easy to use and designed to be mastered by a novice in minutes. Operation is easily accomplished with minimal waste, and consistent deposits can be delivered time after time. The Type K Hushpuppy Depositor deposits 2 generous size hushpuppies for each push of the handle. There are 8 deposit size settings located on the handle with a weight range from approximately 10 to 24 grams. Hopper size is generous and holds about 5.5 pounds of batter. Each hopper is constructed of aluminum; each plunger and cylinder are constructed of stainless steel. The entire unit is corrosion-resistant and easy to clean. The Type K Hushpuppy Depositor is NSF-C2 certified. A convenient holder is available as an option. * Stand sold separately Disclaimer- The photo above shows round hushpuppies. This depositor forms a more oblong egg shaped deposit. The round deposit is made with a Type B, N or F. *Accessories sold separately * 1-year parts and labor cost limited warranty see (attached media) * stand sold separately
Belshaw Donut Robot Mini Donut Conversion Kit for Mark ll / Mark V $2,300.00 $2,645.00
Hopper and plunger set for mini donuts (Mini donuts conversion Kit). The Mini Donut Conversion Kit is made up of exactly the same hopper and plunger combination used by Donut Robot® GP models. You can use the kit with standard Donut Robot® models to change back and forth between standard size donuts and mini donuts. It includes a Mini Donut Hopper and 1-inch Double Plunger. Your machine will use the same conveyor, so it will not make mini donuts quite as fast as a GP machine. Definitely worth getting if you would like the flexibility to make both full size and mini donuts! If your donut robot is older than 2001, please call us at 918-739-4380 to determine compatibility.
Belshaw Belshaw Type K Pancake Dispenser from $180.00 $207.00
Stand is not included; Belshaw's Type K Pancake Dispenser is the professional's choice for accurately depositing pancake batter. It is also suitable for Waffle and Waffle Cones. The Type K is quick and easy to use and provides accurate portion control at a variety of sizes, from mini to extra large. Belshaw's Type K depositors are designed to be mastered by the novice in minutes. Operation is easily accomplished with minimal waste, and consistent deposits are easily delivered time after time. Each pancake dispenser offers 8 calibrated volume settings located on the handle. Hopper size is generous and holds about 5.5 pounds (2.5 kg). Each hopper is constructed of aluminum; each plunger and cylinder is constructed of stainless steel. The entire unit is corrosion resistant and easy to clean. The Type K Pancake Dispenser is NSF-C2 certified. Belshaw Adamatic .
Belshaw Belshaw French Cruller Plunger for Type B/F Depositors $1,010.00 $1,075.00
For French Cruller and French Cake donuts. French Crullers are premium donuts made with a special 'eggy' mix that gives them a different taste and texture to other cake donuts. No box of donuts is complete without them! And they often price higher than other donuts. French Cake donuts are made by the same plunger using regular cake donut mix. If you have no Crullers, then French Cake donuts are a good alternative. You will need a cylinder of the same size as your plunger. If you have two plungers of the same size, you only need one cylinder. Plunger sizes, diameter (inches) 1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2 Plunger sizes, diameter (mm) 38.1, 41.3, 44.5, 47.6 or 50.8
Belshaw Belshaw H&1-2 or H&1-4 Extra 6 quart 13" diameter icing bowls $47.00 $54.05
Belshaw H&1-2 or H&1-4 Extra 6 quart 13" diameter icing bowls If you purchase or have purchased the H&1-2 or the H-1-4, you will need extra bowls for additional icing. The extra bowls make changing flavors and replacing the icing quick and easy. The 966-0010. Bowls are designed explicitly for the Belshaw Icer with multiple bowls allowing for quick and easy swapping of icing for different batches making for better efficiency in your kitchen.
Belshaw Belshaw Star Plunger for Type B/F $375.00 $425.00
For Ring Donuts with a star shape around the center hole. The Star plunger makes Ring donuts and 'Old Fashioned' donuts, similar to the Plain plunger. Should you choose the Star plunger or a Plain'plunger? The difference between them is in the center Hole. The Plain plunger is a bit wacky and unpredictable, and makes center holes with random shapes. The Star plunger is more stable and sensible, with a hole that's generally rounder, and it has a Star pattern around it. So it's up to you! You will need a cylinder of the same size as your plunger. If you have two plungers of the same size, you only need one cylinder. 'Old Fashioned' donuts require Old Fashioned donut mix. Plunger sizes, diameter (inches) 1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2 Plunger sizes, diameter (mm) 38.1, 41.3, 44.5, 47.6 or 50.8
Belshaw Belshaw H&I-4 Icer (2 Options in Variants) from $2,700.00 $3,105.00
Belshaw H&I-4 Icer (2 Options in Variants) 4-BOWL, WATER-WARMED ICER FOR DONUTS AND OTHER PRODUCTS Compatible with all fryers and donut systems This unit comes with 4 bowl water warmed bowls, with its warm heated water for the highest quality iced donuts and properly heated to prevent icing breakdown. Icing table with two 13-inch stainless steel icing bowls Product Details Bowls are gently heated with warmed water. The use of moist heat enables icings to stay in condition for longer periods. Compatible with all Belshaw Adamatic donut systems. 120V and 208-240V models are available Number of bowls: 4 Water temperature (Maximum): 130F (55C) or higher Disclaimer *This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary. * 1-year parts and labor cost limited warranty (see attached media)
Belshaw Belshaw Ball Plunger for "Donut Holes" for Type B/F Depositor $510.00 $586.50
Belshaw Ball Plunger for "Donut Holes" for Type B/F Depositor FOR BALL DONUTS, AKA 'DONUT HOLES' (2,3,4 OR 5 HOLES) You can make a lot of cake donuts 'Holes', in a very short time with this plunger and standard cake donut batter. You can also make Loukoumades and Southern Fried Hushpuppies with this plunger. Plungers can be ordered with 1, 2, 3, 4, or even 5 holes. How big your finished product will depend on: The size (diameter of the plunger". The size of the holes in the plunger. The number of holes in the plunger. If you already have a 1¾ inch plunger and cylinder, then you can choose a 1¾ inch ball plunger, and use the cylinder you already have. The most efficient ball plunger is 2 inches because it can "push out" a lot of cake donut batter through the holes in the plunger. Three holes of ¾-inch diameter are common choices. There are many different choices of plunger size, hole diameter, and a number of holes possible. As with all other cake donuts, you can increase or decrease the size of the finished donut using the dial setting on your Depositor, from 1 to 3. As your dial setting gets bigger, the batter will come out longer - like toothpaste coming out of a tube. The frying process will turn the batter into a round ball shape. If the dial setting is too big, the final product may become longer and slightly oblong shape. This is because the batter is squeezed out of the holes, like toothpaste out of a tube. Plunger sizes, diameter (inches) 1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2 Plunger sizes, diameter (mm) 38.1, 41.3, 44.5, 47.6 or 50.8 Number of holes in plunger 1, 2, 3, 4 or 5 Diameter of holes in plunger ½-1 inch (13-25 mm) One of the best sellers in all donut shops is donut Holes. This produces the cake donut holes that are popular with your customers. The best-selling variety for the donut hole plunger is the 4-hole plunger. We asked why this is to our customers and most have stated that the 4-hole produces the equivalent of cutting the store's cake donut into 4 slices. When determining the size you desire consider this analogy of cutting the donut into (2)halves, (3) thirds, (4) fourths, or (5) fifths to determine your best size plunger then determine the collar size you prefer for the plunger. The size of the Ball / Holes is determined by the number of holes extruded and the amount of dough the settings on the type B/F or set to. The fewer amount of holes on the plunger the larger holes will be produced. The more the amount of cake batter is divided, the smaller the holes will be. If you produce a 2-ounce donut and the batter is divided by two holes then the donut hole size will be approximately 1 ounce. If you purchase the Ball dropper that produces 5 holes at a time then the 2 ounces will be divided to produce approximately .40 ounce donut holes. This is also dependent on the 1 to 3 setting on the Belshaw Type B/F that determines the amount of batter used with each deposit. Produces ball-shaped cake donuts or 'donut holes. With a compatible mix recipe, can also make other products such as hushpuppies, loukoumades, falafel, fish balls, and more. Contact your distributor when ordering, because there are many size options
Belshaw Belshaw Jelly Injector -AutoFiller 6 quart injector hopper unit $419.00 $481.85
Belshaw Jelly Injector -AutoFiller 6 quart injector hopper unit- Nozzles sold seperately JELLY, JAM, CUSTARD, AND CREME INJECTOR FOR DONUTS AND PASTRY The new Jelly Filler that's designed for donut production first! ETL Sanitation Listed conforms to NSF /ANSI Standard 8 Belshaw's Jelly Injector is a fast, quick, and easy way to use clean, and maintain perfect for all your jelly donuts and jellying needs. Easy to use doesn't take too much space allowing you to quickly inject your donuts and on average 15-30 minutes to fill a case of filled donuts. Auto filler is one of the best tools for optimizing your jelly filling and maximizing your output. Product Features 6-quart hopper Delivers 1/6 oz to 16 oz on each side Fills up to 1,200 pcs/hour depending on volume 2 stainless steel 7/16" diameter nozzles (standard) 5/16" miniature nozzles (optional) Minimizes mess and waste Simple digital operation Easy-clean drip tray under spouts Trigger activation when inserting product (when the drip tray is nudged forward, the pump activates) The pump reverses at the end of each fill to prevent dripping No installation required easy to clean with warm water and +mild detergent Attractive durable coated-plastic exterior Maintenance-free Extra hoppers and spouts are available 120Volts, 60 Watts (1/12 HP motor) ETL Sanitation Listed Conforms to NSF /ANSI Standard 8 Disclaimer *This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary. * 1-year parts and labor cost limited warranty
Belshaw Adamatic GP-RS' SYSTEM MK-1025X1-9/16 Hopper for use of RS Ball Plunger with GP Models $1,325.00
* You only need this if you do not currently have a standard 1-9/16" hopper with your GP Mark unit or have the 1-13/16 plunger and hopper for the Mark Unit. Belshaw 9/16 Donut Robot Standard Hopper (Without Plunger) With this Donut Robot Standard Hopper (Plunger not included) You can run more flavors making your lineup by just switching to this extra hopper making your operation more streamlined by switching out hoppers for different Donuts lineups, all while your operation more efficient. Plunger sold separately MK-1025X1-9/16 Donut Robot standard hopper (w/o plunger)