Cylinder for Type B/F (1-7/8 or 2 inches)
Belshaw Adamatic Cylinder for Type B/F (1-7/8 or 2 inches) $280.00
[SIZE] = DIAMETER IN INCHES [Size] = 1-7/8 or 2 Plunger size and cylinder size must always match. For example, a 2 inch plunger must always be used with a 2 inch cylinder. You can use all types of plunger with a cylinder of the same size. Used with Type B and Type F depositors. Example: 0035SSBx1-7/8 ' 0035SSBx2
Cylinder for Type B/F (up to 1-3/4 inch)
Belshaw Adamatic Cylinder for Type B/F (up to 1-3/4 inch) $280.00
[SIZE] = DIAMETER IN INCHES [Size] = 1-1/2, 1-5/8, or 1-3/4 inches Plunger size and cylinder size must always match. For example, a 1-3/4 inch plunger must always be used with a 1-3/4 inch cylinder. You can use all types of plunger with a cylinder of the same size. Used with Type B and Type F depositors. Examples: 0035SSAx1-1/2, 0035SSAx1-3/4
Belshaw Plain Plunger for Type B/F
Belshaw Adamatic Belshaw Plain Plunger for Type B/F $330.00
FOR RING DONUTS AND 'OLE FASHION' DONUTS [Size] = 1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2 (diameter in inches) For Ring donuts (using Standard cake donut mix) or for "Old Fashion" donuts (using Old Fashion mix). Must match a cylinder of the same size. Used with Type B and Type F depositors. Example: 7SSx1-1/2 ' 7SSx1-5/8 ' 7SSx1-3/4 ' 7SSx1-7/8 ' 7SSx2
Belshaw Star Plunger for Type B/F
Belshaw Adamatic Belshaw Star Plunger for Type B/F $360.00
FOR RING DONUTS WITH A STAR SHAPE AROUND THE CENTER HOLE [Size] = 1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2 (diameter in inches) The Star plunger typically makes a ring donut with a more consistent, rounder hole than the plain plunger, with a star pattern around it. Must match a cylinder of the same size. Used with Type B and Type F depositors. Example: 7SC-SSx1-5/8 ' 7SC-SSx1-3/4 '
Belshaw Dunkerette Plunger for Type B/F
Belshaw Adamatic Belshaw Dunkerette Plunger for Type B/F $381.00
FOR DUNKERETTES (HALF-DONUTS) Available in 1-3/4 inch diameter only. Requires a 1 3/4" Cylinder for the type B/F depositor. The Dunkerette plunger forms 2 deposits, each resembling approximately one half of a ring donut. Used with Type B and Type F depositors.
Belshaw Ball Plunger for
Belshaw Adamatic Belshaw Ball Plunger for "Donut Holes" for Type B/F Depositor $475.00
FOR BALL DONUTS, AKA 'DONUT HOLES' (2,3,4 OR 5 HOLES) You can make a lot of cake donut 'Holes', in a very short time with this plunger and standard cake donut batter. You can also make Loukoumades and Southern Fried Hushpuppies with this plunger. Plungers can be ordered with 1, 2, 3, 4 or even 5 holes. How big your finished product will be depends on: The size (diameter of the plunger". The size of the holes in the plunger. The number of holes in the plunger. If you already have a 1 ¾ inch plunger and cylinder, then you can choose a 1 ¾ inch ball plunger, and use the cylinder you already have. The most efficient ball plunger is 2 inch because it can "push out" a lot of cake donut batter through the holes in the plunger. Three holes of ¾-inch diameter are common choices. There are many different choices of plunger size, hole diameter and number of holes possible. As with all other cake donuts, you can increase or decrease the size of the finished donut using the dial setting on your Depositor, from 1 to 3. As your dial setting gets bigger, the batter will come out longer - like toothpaste coming out of a tube. The frying process will turn the batter into a round ball shape. If the dial setting is too big, the final product may become longer and slightly oblong shape. This is because batter is squeezed out of the holes, like toothpaste out of a tube. Plunger sizes, diameter (inches) 1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2 Plunger sizes, diameter (mm) 38.1, 41.3, 44.5, 47.6 or 50.8 Number of holes in plunger 1, 2, 3, 4 or 5 Diameter of holes in plunger ½-1 inch (13-25 mm) One of the best sellers in all donut shops is donut Holes. This produces the cake donut holes that are popular with your customers. The best selling variety for the donut hole plunger is the 4 hole plunger. We asked why this is to our customers and most have stated that the 4 hole produces the equivalent of cutting the stores cake donut into 4 slices. When determining the size you desire consider this analogy of cutting the donut into (2)halves, (3) thirds, (4) fourths or (5) fifths to determine your best size plunger then determine the collar size you prefer for the plunger. The size of the Ball / Holes is determined by the amount of holes extruded and the amount of dough the settings on the type B/F or set to. The fewer amount of holes on the plunger the larger holes will be produced. The more the amount of cake batter is divided, the smaller the holes will be. If you produce a 2 ounce donut and the batter is divided by two holes then the donut hole size will be approximately 1 ounce. If you purchase the Ball dropper that produces 5 holes at a time then the 2 ounces will be divided to produce approximately .40 ounce donut holes. This is also dependent on the 1 to 3 setting on the Belshaw Type B/F that determines the amount of batter used with each deposit. Produces ball shaped cake donuts or 'donut holes'. With a compatible mix recipe, can also make other products such as hushpuppies, loukoumades, falafel, fish balls, and more. Contact your distributor when ordering, because there are many size options
Belshaw Loukoumades Plunger for Type B/F depositor
Belshaw Adamatic Belshaw Loukoumades Plunger for Type B/F depositor $510.00
The Standard Loukoumades Plunger makes 3 per plunger stroke. The plunger is for a 2" cylinder only. The Plunger is 2" in diameter , with (3) x 3/4" round holes to create the Loukoumades. To create a variance in size of the Loukoumade the adjustment control on the Belshaw type B/F depositor can vary from 1-3 controlling the deposit amount of batter. Loukoumades are bite-sized sweet honey balls, which are deep fried to golden and crispy perfection. Greek donuts (loukoumades) are traditionally served soaked in hot honey syrup, sprinkled with cinnamon and garnished with chopped walnuts or toasted sesame seeds. Simply irresistable! For the chocolate lovers go over the top and drizzle these delicious Greek donuts (loukoumades) with some rich chocolate sauce! 7G-1000-103C
Mini Donut 1
Belshaw Adamatic Mini Donut 1" Plunger and Cylinder for type B/F Belshaw Cake Dropper $576.00
Mini Donut 1 inch plunger and matching 1" Cylinder for the Type B or F Belshaw cake depositor. Create mini donuts with ease using the type B or F Belshaw cake depositor. This makes it easy to sell the mini donuts by the dozen. 7SSx1 & 0035ssax1
stick-plunger-for-type-b-f-1-slot
Belshaw Adamatic stick-plunger-for-type-b-f-1-slot $581.00
FOR STICK DONUTS (LARGER) Makes one stick donut per deposit. The size of the donut will depend on the size of the slot and on the dial setting of the depositor. (Setting 1 or 2 on the depositor will make a shorter stick, setting 3 will make a longer stick). Used with Type B and Type F depositors.
Stick Plunger for Type B/F (2 slots) For Smaller Sticks (6 Plunger Sizes Available)
Belshaw Adamatic Stick Plunger for Type B/F (2 slots) For Smaller Sticks (6 Plunger Sizes Available) $581.00
FOR STICK DONUTS (Smaller) Makes two stick donuts per deposit. The size of the donut will depend on the size of the slot and on the dial setting of the depositor. (Setting 1 or 2 on the depositor will make a shorter stick, setting 3 will make a longer stick). Used with Type B and Type F depositors.
Belshaw Type B/ F Churro Plunger
Belshaw Adamatic Belshaw Type B/ F Churro Plunger $750.00
Belshaws New Churro Plunger. This is only offered in one standard plunger size (2) The Length of each churro depends on the batter weight setting on the Type B or F Belshaw Donut Depositor. ONE SIZE ONLY - 2" Cylinder size required
Belshaw Hushpuppy Plunger for Type B/F Depositor
Belshaw Adamatic Belshaw Hushpuppy Plunger for Type B/F Depositor $770.00
This plunger is the easiest way to create quality hushpuppies. The Belshaw Hushpuppy Plunger makes (3) hushpuppies per plunger stroke. The plunger requires a 2" cylinder and each hole is 7/8" to 1" across. No fish fry is complete without the serving of Hushpuppies next to the main course. For a real treat use the apple spice, blueberry, or vanilla cake donut mix to provide a sweet variation to the traditional Hushpuppy served for years. For a free sample of cake donut mix try Bakerywholesalers.com cake mixes.
Belshaw Krinkle Plunger for Type B/F
Belshaw Adamatic Belshaw Krinkle Plunger for Type B/F $792.00
FOR KRINKLE DONUTS [Size] = 1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2 (diameter in inches) Krinkle donuts resemble 8 ball shapes linked together in a ring. This plunger can make Asian 'Pon-de-Ring' donuts. Used with Type B and Type F depositors. Example: 7B-1004x1-1/2 ' 7B-1004x1-5/8 ...
Belshaw French Cruller Plunger for Type B/F Depositors
Belshaw Adamatic Belshaw French Cruller Plunger for Type B/F Depositors $980.00
FOR FRENCH CRULLER AND FRENCH CAKE DONUTS [Size] = 1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2 (diameter in inches) Use this plunger with special French Cruller mix to make French Crullers. Use standard cake donut mix to make a 'French Cake' donut. Used with Type B and Type F depositors. Example: 7B-1009x1-7/8 ' 7B-1009x2