Dual Automatic Depositor Kit for Mark VI and Mark VI (Deep) (5 options in Variants available)
Belshaw Adamatic Dual Automatic Depositor Kit for Mark VI and Mark VI (Deep) (5 options in Variants available) $8,650.00
Description: The Dual Depositor Kit can be installed on the Mark VI fryer (or Mark VI 'Deep' fryer) at the time of manufacture, or can be retrofitted to existing Mark VI fryers. The Dual Depositor Kit automatically deposits 4 cake donuts in each conveyor row of the Mark VI fryer. It is a labor-saving alternative to using a Belshaw Type F depositor and produces well-formed, high quality cake donuts. The operator has only to fill the hoppers with batter, and the depositors do the rest automatically. The Dual Depositor Kit makes standard size ring donuts only. You cannot make mini donuts using the kit. Production Capacity: up to 112 dozen/hr • Donut Robot ® Mark VI fryer with dual depositor: 112 dozen cake donuts per hour. • Donut Robot ® Mark VI 'Deep' fryer with dual depositor: 91 dozen cake donuts per hour (because Flight Bars are spaced further apart) Production capacity is estimated at 95-second frying time. Actual production rate will vary depending on size and composition of donuts, frying time, frying temperature and percentage of capacity used. What is Included •(2) Donut Robot ® depositors. Each depositor is equipped with a hopper* and 1-9/16" plunger. This plunger can normally produce ring donuts up to 3-1/2" average diameter, and 1-3/4 oz. average weight. •2 depositor mounting systems • New motor, compatible with dual depositor system • All necessary hardware such as nuts, bolts and washers •Template for installing retrofit dual depositor kit. (for Retrofits only) * Note: Hopper is not compatible with standard Donut Robot hoppers Electrical The Dual Depositor system connects directly to the Mark VI fryer and does not require any external power source. For retrofits, an experienced electrician or equipment technician may be needed to replace the fryer motor inside the control panel of the machine. Ordering information Order the Dual Depositor kit from your Belshaw distributor using one of these part numbers • Part Number: MKVI-1300. For pre-installation on new Mark VI fryer •Each carton 16"x16"x22", approx 35 lbs (41x41x56 cm, 16 kg)
Belshaw Donut Robot® Mark VI Standard  (2 variables in Variants)
Belshaw Adamatic Belshaw Donut Robot® Mark VI Standard (2 variables in Variants) $28,574.00
AUTOMATIC DONUT MACHINE DESIGNED AS PART OF A MARK VI DONUT SYSTEM. CAPACITY 112 DOZEN/HOUR The Donut Robot ® Mark VI is part of the Mark VI donut system, for high quality cake and yeast-raised donuts. The EZMelt and Feed Table accessories are essential to running the Mark VI system. Other accessories, such as proofer, glazer, and icer, are optional. Now with 2 choices for making cake donuts - Type F electric depositor, or the new Dual Automatic system depositing 4 donuts per row. Belshaw Adamatic's Donut Robot ® Mark VI Production System makes donut production faster and easier than open kettle frying. Less training is required to work the system efficiently, and more consistent quality can be achieved. The automatic fryer can reduce shortening consumption by as much as 50% compared to standard fryers. It provides identical frying conditions for each donut, without an operator needing to stand over the fryer to insert, turn and lift donuts out manually. Both cake and yeast-raised donuts can equal or surpass donuts made by standard kettle fryers. Mark VI fryers are the same length as the Donut Robot Mark V, and two (2) times the width. Therefore the capacity is double that of the Mark V. On a Mark VI the flight bars are spaced 3- 3/4" (95mm) from center to center allowing donuts up to 3 3/4" width. On a Mark VI the flight bars are 4- 1/2" (114mm) from center to center, to accommodate larger donut varieties in addition to the smaller varieties. Drain Valve is purchased separately on this model Mark Vl is certified ETL to UL, CSA and NSF standard Mark Vl with/ Type F depositor - 1060 per hour Mark VI with/dual automatic depositor- 1060 per hour Mark VI Deep- 860 per hour Cake donuts: Makes a full variety of cake donuts using either: Type F depositor, electric, operated manually, capacity approximately 112 dozen donuts per hour, at 95 seconds frying time, makes crullers, krinkles, sticks, and every kind of cake donut using a variety of plungers. Dual automatic Donut Robot ® Depositor, same capacity as Type F. For Ring donuts only, but saves a lot of labor and effort by depositing 4 donuts automatically per row, using the same system as the Donut Robot ® Mark II. Yeast-Raised donuts: makes excellent yeast-raised donuts with the addition of optional Feed Table, Trays, and Cloths, capacity approximately 96 dozen donuts per hour, at 110 seconds frying time. Suitable for any yeast-raised product that will fit between the conveyor bars of the fryer. That means Rings, Bars, Berliners, even Twists and unusual shapes. All electric donut machine, with automatic conveyor, turner, and outfeed belt Speed is adjustable by dial on control panel Heavy duty elements, with high temperature shut-down switch Conveyor and kettle are all removable for easy cleaning 3 phase power supply required, with voltages available for all countries
Belshaw Donut Robot Mark V-Electric (6 Variables in Variants) With Mini Donut Option Available
Belshaw Adamatic Belshaw Donut Robot Mark V-Electric (6 Variables in Variants) With Mini Donut Option Available $17,800.00
AUTOMATED DONUT MAKER FOR STANDARD SIZE DONUTS. CAPACITY 56 DOZEN/HOUR, ELECTRIC. An extended length donut maker that produces high quality, well formed cake donuts right out of the box, and makes excellent raised donuts with a few accessories. Capacity is approximately 56 dozen per hour. With a mini donut conversion kit, you can make both full size and mini donuts. The Mark V is compatible with the Insider Ventless Cabinet. All electric donut machine, capacity approximately 56 dozen standard size donuts per hour Deposits 2 standard donuts per conveyor row. A half-speed switch cuts output to 1 per row Makes consistent, well rounded cake donuts with synchronized cake donut depositor Makes excellent yeast raised donuts with the addition of optional Feed Table, Trays, and Cloths (see accessories) Dial with generous range for adjusting size of donut Makes mini donuts with optional mini donut hopper and plunger, which will deposit 4 minis per row. (Part # MK-1502-1, see accessories). Mini donut capacity will be approximately 109 dozen/hourSpeed is adjustable by dial on control panel Outfeed belt dispenses donuts into collection device such as Roto-Cooler Heavy duty elements which tilt upward when cleaning High temperature shut-down switch Hopper, plunger, conveyor, and kettle are all removable for easy cleaning 1-9/16 inch Plain Plunger for Ring donuts Single and 3 phase voltages available for all countries Standard North America models certified to UL, NSF and CSA
Belshaw Donut Robot Mark II (Natural Gas or Propane) (4 variations available in Variants) Standard Donuts with Mini Donut Option
Belshaw Adamatic Belshaw Donut Robot Mark II (Natural Gas or Propane) (4 variations available in Variants) Standard Donuts with Mini Donut Option $15,600.00
AUTOMATIC DONUT MAKER FOR STANDARD SIZE DONUTS. CAPACITY 37 DOZEN/HOUR, GAS-HEATED. This gas-heated donut maker produces high quality, well formed cake donuts right out of the box. Capacity is approximately 37 dozen per hour. With a mini donut conversion kit, you can make both full size and mini donuts. This machine runs on gas and just a small amount of 120V or 240V power, so you can take it with you almost anywhere! Gas heated donut machine with electrically powered conveyor and depositor Capacity approximately 37 dozen donuts per hour Requires only 360 Watts of power for conveyor and despositor Deposits 2 standard size donuts per conveyor row 40,000 BTU per hourNatural Gas and Liquid Propane models available (specify at purchase) Makes consistent, well rounded donuts with synchronized depositor Makes excellent yeast raised donuts with the addition of optional Feed Table, Trays, and Cloths Makes mini donuts with optional mini donut hopper and plunger, which will deposit 4 mini donuts per row. (Part # MK-1502-1, see accessories). Mini donut capacity will be approximately 109 dozen/hour Speed is adjustable by dial on control panel Dial for adjusting size of donut Automatic conveyor with automatic donut turner Outfeed belt dispenses donuts into collection device such as Roto-Cooler High temperature shut-down switch Hopper, plunger, and conveyor, and kettle are all removable for easy cleaning Not compatible with Insider Ventless Cabinet (only compatible with electric models)
Belshaw Donut Robot Mark II (6 Variations in variants) Standard Donut /Mini Option Available
Belshaw Adamatic Belshaw Donut Robot Mark II (6 Variations in variants) Standard Donut /Mini Option Available $12,530.00
AUTOMATED DONUT MAKER FOR STANDARD SIZE DONUTS. CAPACITY 37 DOZEN/HOUR, ELECTRIC. This donut maker produces high quality, well formed cake donuts right out of the box, and makes excellent raised donuts with a few accessories. Capacity is approximately 30 dozen per hour. With a mini donut conversion kit, you can make both full size and mini donuts. The Mark II is compatible with the Insider Ventless Cabinet. All electric donut machine, capacity approximately 37 dozen standard size donuts per hour Deposits 2 standard donuts per conveyor row. A half-speed switch cuts output to 1 per row Makes consistent, well rounded cake donuts with synchronized cake donut depositor Dial with generous range for adjusting size of cake donut Makes mini donuts with optional mini donut hopper and plunger, which will deposit 4 minis per row. (Part # MK-1502-1, see accessories). Mini donut capacity will be approximately 109 dozen/hour Electronic temperature controller - maintains temperature normally within ±1 degree Speed is adjustable by dial on control panel Outfeed belt dispenses donuts into collection device such as Roto-Cooler Heavy duty elements which tilt upward when cleaning High temperature shut-down switch Hopper, plunger, conveyor, and kettle are all removable for easy cleaning 1-9/16 inch Plain Plunger for Ring donuts Single and 3 phase voltages available for all countries North America models certified to UL, NSF and CSA
Belshaw Donut Robot Mark VI Deep (2 variables in Variants)
Belshaw Adamatic Belshaw Donut Robot Mark VI Deep (2 variables in Variants) $28,550.00
AUTOMATIC DONUT MACHINE DESIGNED AS PART OF A MARK VI DONUT SYSTEM. CAPACITY 112 DOZEN/HOUR The Donut Robot ® Mark VI is part of the Mark VI donut system, for high quality cake and yeast-raised donuts. The EZMelt and Feed Table accessories are essential to running the Mark VI system. Other accessories, such as proofer, glazer, and icer, are optional. Now with 2 choices for making cake donuts - Type F electric depositor, or the new Dual Automatic system depositing 4 donuts per row. Belshaw Adamatic's Donut Robot ® Mark VI Production System makes donut production faster and easier than open kettle frying. Less training is required to work the system efficiently, and more consistent quality can be achieved. The automatic fryer can reduce shortening consumption by as much as 50% compared to standard fryers. It provides identical frying conditions for each donut, without an operator needing to stand over the fryer to insert, turn and lift donuts out manually. Both cake and yeast-raised donuts can equal or surpass donuts made by standard kettle fryers. Mark VI fryers are the same length as the Donut Robot Mark V, and two (2) times the width. Therefore the capacity is double that of the Mark V. On a Mark VI the flight bars are spaced 3- 3/4" (95mm) from center to center allowing donuts up to 3 3/4" width. On a Mark VI the flight bars are 4- 1/2" (114mm) from center to center, to accommodate larger donut varieties in addition to the smaller varieties. Drain Valve is purchased separately on this model Mark Vl is certified ETL to UL, CSA and NSF standard Mark Vl with/ Type F depositor - 1060 per hour Mark VI with/dual automatic depositor- 1060 per hour Mark VI Deep- 860 per hour Cake donuts: Makes a full variety of cake donuts using either: Type F depositor, electric, operated manually, capacity approximately 112 dozen donuts per hour, at 95 seconds frying time, makes crullers, krinkles, sticks, and every kind of cake donut using a variety of plungers. Dual automatic Donut Robot ® Depositor, same capacity as Type F. For Ring donuts only, but saves a lot of labor and effort by depositing 4 donuts automatically per row, using the same system as the Donut Robot ® Mark II. Yeast-Raised donuts: makes excellent yeast-raised donuts with the addition of optional Feed Table, Trays, and Cloths, capacity approximately 96 dozen donuts per hour, at 110 seconds frying time. Suitable for any yeast-raised product that will fit between the conveyor bars of the fryer. That means Rings, Bars, Berliners, even Twists and unusual shapes. All electric donut machine, with automatic conveyor, turner, and outfeed belt Speed is adjustable by dial on control panel Heavy duty elements, with high temperature shut-down switch Conveyor and kettle are all removable for easy cleaning 3 phase power supply required, with voltages available for all countries