EDHARD FHP-3368 GENUINE OEM REPLACEMENT PART DISC - PRESSURE - PLASTIC - 18 Length: 15.05 in / 38.23 cm Width: 10.1 in / 25.65 cm Height: 3.6 in / 9.14 cm Weight: 2.1 lbs / 953 g

The P-Series power base (1/15HP). This base is reliable and durable, engineered for years of maintenance-free service. The exterior is designed so that merely a damp cloth is needed to keep it clean. These bases have a number of features that make them useful in a wide variety of applications. They include - Normal Cycling, Reverse, Automatic Cycling and Continuous Dispensing, which can be selected at the keypad. The F-Series filler units are suited for P-Series power base.Normal Cycle: The amount of product to be dispensed can be preset at the digital keypad. As the trip arm is pressed, the unit will cycle once to dispense the preset amount, then stop and reverse.Reverse:The reverse is needed to pull product back after a dispensing cycle is completed, which prevents dripping. Reverse can be adjusted to meet specific requirements.Automatic Cycle:This function eliminates the need to continually press the trip arm during multi-cycle applications. In ths function, the amount dispensed and waiting time can be set to suit a specific need. Automatic cycling eliminates operator fatigue and improves productivity in repetetive, long-running jobs.Continuous Dispensing:When selecting this function, the operator or a remote-triggering device, such as a photoelectric switch, determines the start and stop of the pumping action. This function is useful when a continuous stream of product is deposited on a conveyor or manually via a hose attachment.All power bases can be triggered manually by a trigger switch (standard on P, PS, PV and PT power bases), our foot switch or hose assembly (accessories), or your own photoelectric switch.

The P-Series power base (1/15HP). This base is reliable and durable, engineered for years of maintenance-free service. The exterior is designed so that merely a damp cloth is needed to keep it clean. These bases have a number of features that make them useful in a wide variety of applications. They include - Normal Cycling, Reverse, Automatic Cycling and Continuous Dispensing, which can be selected at the keypad. The F-Series filler units are suited for P-Series power base.Normal Cycle:The amount of product to be dispensed can be preset at the digital keypad. As the trip arm is pressed, the unit will cycle once to dispense the preset amount, then stop and reverse.Reverse:The reverse is needed to pull product back after a dispensing cycle is completed, which prevents dripping. Reverse can be adjusted to meet specific requirements.Automatic Cycle:This function eliminates the need to continually press the trip arm during multi-cycle applications. In ths function, the amount dispensed and waiting time can be set to suit a specific need. Automatic cycling eliminates operator fatigue and improves productivity in repetetive, long-running jobs.Continuous Dispensing:When selecting this function, the operator or a remote-triggering device, such as a photoelectric switch, determines the start and stop of the pumping action. This function is useful when a continuous stream of product is deposited on a conveyor or manually via a hose attachment.All power bases can be triggered manually by a trigger switch (standard on P, PS, PV and PT power bases), our foot switch or hose assembly (accessories), or your own photoelectric switch. Edhard's Power Base is a cream-colored unit that houses electronics and a motor. It engages the filler unit and makes it dispense your food product. The keypad controls the amount of product dispensed, and the cycle type. The P-Series unit has enough power to dispense batters, cottage cheese, creams, custard, jelly, ketchup, mustard, pudding, and yogurt, stiff creams, chocolate and nougat.P-Series Power Base Reliable and Durable Has enough Power to Dispense batters to nougat fillings Reverse Pull Back Prevents Dripping After You Are Done Filling Automatic Cycle Option Continuous Dispensing Perfect for High Volume Donut or Bakery's Model #: P-4012

2 Spouts, 100% Stainless Steel

Belshaw Jelly Injector -AutoFiller 6 quart injector hopper unit- Nozzles sold seperately JELLY, JAM, CUSTARD, AND CREME INJECTOR FOR DONUTS AND PASTRY The new Jelly Filler that's designed for donut production first! ETL Sanitation Listed conforms to NSF /ANSI Standard 8   Belshaw's Jelly Injector is a fast, quick, and easy way to use clean, and maintain perfect for all your jelly donuts and jellying needs.  Easy to use doesn't take too much space allowing you to quickly inject your donuts and on average 15-30 minutes to fill a case of filled donuts. Auto filler is one of the best tools for optimizing your jelly filling and maximizing your output. Product Features 6-quart hopper Delivers 1/6 oz to 16 oz on each side Fills up to 1,200 pcs/hour depending on volume 5/16" miniature nozzles (optional) Minimizes mess and waste Simple digital operation Easy-clean drip tray under spouts Trigger activation when inserting product (when the drip tray is nudged forward, the pump activates) The pump reverses at the end of each fill to prevent dripping No installation required easy to clean with warm water and +mild detergent Attractive durable coated-plastic exterior Maintenance-free Extra hoppers and spouts are available 120Volts, 60 Watts (1/12 HP motor) ETL Sanitation Listed Conforms to NSF /ANSI Standard 8 Disclaimer  *This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary. * 1-year parts and labor cost limited warranty

AUTOFILLER DONUT INJECTOR Jelly, Jam, Custard and Creme Injector for donuts and pastries Autofiller is the new Jelly, Jam and Creme Injector that's designed for donut production first! The injector doesn't occupy much space, but the donuts you inject in just 15-30 minutes could be enough to fill up a display case!  Autofiller is simple and very effective in operation. The black power base at the bottom is sealed and maintenance free. The injector/hopper unit can be easily cleaned since it contains only a few components.  

Belshaw Jelly Filler - AutoFiller Donut Injector  JELLY, JAM, CUSTARD AND CREME INJECTOR FOR DONUTS AND PASTRY The new Jelly Filler that's designed for donut production first! ETL Sanitation Listed, conforms to NSF /ANSI Standard 8 AutoFiller is Belshaw Adamatic's new Jelly, Jam and Creme Injector that's designed for donut production first! The injector doesn't occupy much space, but the donuts you can inject in just 15-30 minutes could be enough to fill up whole display case! This is a simple to use machine, with the power base sealed and maintenance free. The injector/hopper unit can be easily cleaned since it contains only a few components. The AutoFiller comes with a pair of standard size 7/16" nozzles for regular donuts, Features: 6 quart hopper Delivers 1/6 oz to 16 oz each side Fills up to 1,200 pcs/hour depending on volume 2 stainless steel 7/16" diameter nozzles (standard) 5/16" miniature nozzles (optional) Minimizes mess and waste Simple digital operation Easy-clean drip tray under spouts Trigger activation when inserting product (when the drip tray is nudged forward, the pump activates) Pump reverses at the end of each fill to prevent dripping No installation requiredEasy to clean with warm water +mild detergent Attractive durable coated-plastic exterior Maintenance-free Extra hoppers and spouts available 120Volts, 60 Watts (1/12 HP motor) ETL Sanitation Listed Conforms to NSF /ANSI Standard 8

Filler Base Unit- Injector hopper not included and sold separately

The AutoFiller Foot Pedal is for the Belshaw Adamatic's new Jelly, Jam and Creme Injector that's designed for donut production first! This works on all 2020 models and newer The foot Pedal comes with enough cord to place the pedal on the floor allowing the operator to place the product on the filler nozzle and inject the filling with a simple tap of the foot pedal. Simple to use and plugs into the back of the machine.

2 stainless steel 5/16" diameter nozzles- A pair of standard size 5/16" nozzles for regular donuts for the Auto Filler. 2 stainless steel 5/16" diameter nozzles (mini).

A pair of standard size 7/16" nozzles for regular donuts for the AutoFiller. 2 stainless steel 7/16" diameter nozzles (standard). Made to help easily fit to your Belshaw auto filler. These  7/16" diameter nozzles come with 2 in the order and are made to help quickly and easily fill up your jelly donuts. Made from easily cleanable materials making cleaning easy. The tips are made to last great in any kitchen. Other sizes available look for 5/16 inch and 4 prong spouts 5/16 inch.

The AutoFiller Foot Pedal is for the Belshaw Adamatic's new Jelly, Jam and Creme Injector that's designed for donut production first! This works on all 2020 models and newer The foot Pedal comes with enough cord to place the pedal on the floor allowing the operator to place the product on the filler nozzle and inject the filling with a simple tap of the foot pedal. Simple to use and plugs into the back of the machine.

4 prong x miniature nozzles 5/16" diameter with covers. The base for the four nozzles is approximately 3" across with (4) 5/16" diameter nozzles. This spacing results in the filling of choice being dispersed about 1" apart. This makes this filler nozzle excellent for filling jelly or creme filled or large donuts/pastry because it ensures even filling of the pastry. We suggest the purchase of 2 nozzles with each filler but they are sold individually.