Hand-crank depositor for 616B Fryer and Cut-N-Fry *- Shown with Mounting Kits For Photos of Depositor and Hopper,  Belshaw Adamatic Type N is a rotary crank donut depositor. Type N is designed for Belshaw Cut-N-Fry for Donuts / Hushpuppies / Loukoumades, although it can be used with other frying systems if the correct mounting system is chosen. The hopper holds approximately 12lbs (5.5kg) of batter. 3 mounting systems are available Column mount with short arms - this is the mount designed for Belshaw Adamatic 616B fryer. (The combination is called a Cut-N-Fry system). Column mount with long arms - used when 2 616B fryers are used side by side. A single Type N can be used for both fryers. Wall mount with long arms - used with any fryer other than Belshaw Adamatic 616B. Cylinder and plungers are ordered separately for cake donuts, Loukoumades and hushpuppies. See accessories for details.

The Type N was designed to work with Belshaw's 616B Cut-N-Fry system. The mounting system is supplied with every Cut-N-Fry - you do not need to make a separate purchase.  For other situations, Type N has 3 mounting systems - either to your existing 616B fryer, or to a wall.  The Short Arm Column Mount attaches the depositor to your 616B fryer, exactly as supplied on our Cut-N-Fry system. To convert your 616B fryer to Cut-N-Fry, choose this kit. N-1033 Type N Short-Arm Column Mounting Kit for 616B Fryer  22 inches full extension (from the mounting point to the donut deposit, center-to-center) The Long Arm Column Mount attaches the depositor to any suitable fryer. You may need a stiffening plate (Bracket Plate kit P-1000) to hold the mounting kit.  N-1034 Type N Long-Arm Column Mounting Kit for other fryers 32 inches full extension (from the mounting point to the donut deposit, center-to-center)   The Wall Mount attaches your depositor to the wall behind your fryer. The installation must be very dependable and secure. If you move the fryer, you must re-install the Wall Mount. It is sometimes a good solution if a Type N depositor is combined with a different fryer.  N-1036 Wall Mounting Kit for Type N 32 inches full extension (from the mounting point to the donut deposit, center-to-center) A simple Lock Collar is supplied with both Mounting Kits to set your depositor height about 1¼ to 1½" above the shortening (30-40 mm). The optional Precision Height Adjuster is useful for making faster, more accurate height adjustments.

Precision Height Adjuster for Type B/ F/ N (column mount only) Belshaw Cake Donut Depositors. This collar provides a more accurate setting of height adjustment thn the supplied set collar that comes in the column mount kit.