Belshaw Belshaw 624 Donut Fryer 24" X 24" (Electric) from $9,500.00 $10,051.00
ELECTRIC-HEATED, FRYING AREA 24 X 24 INCHES (61 X 61 CM) This industry standard electric donut fryer is used by donut shops and bakeries all over North America and the world! The fryer holds 36 standard size cake or yeast-raised donuts and has a capacity of approximately 80-100 dozen donuts/hour. Frying Area 24 x 24 inches (61 x 61 cm) Shortening capacity 96 lbs by weight, 13 gallons by volume 44 kg/49 liters) Capacity 36 standard donuts, approximately 80-100 dozen donuts per hour 208-240 Volts, 50/60Hz, 1-phase or 3-phase (specify when ordering) Drain tray on right side of fryer (can be moved to left) Heavy duty elements, tiltable upwards for easy kettle cleanup Thermostat controlled heat2 cake donut frying screens Heavy duty drain and valve with exterior handle to empty shortening ETL certified to UL-197, CSA C22.2 and NSF-4 A ventilation and fire suppression hood is usually required for indoor locations.
Belshaw Adamatic 624 Submerger for Electric 24" x 24" $870.00 $943.00
Item 624-1521 for Belshaw 624 Electric 24" x 24" SUBMERGES PRODUCTS BELOW THE SHORTENING. AVAILABLE IN 3 SIZES. Available in 3 sizes to fit Belshaw Open Kettle fryers 618L, 624 and 634. It holds any fried product below the shortening. It is hinged to the back of the fryer and swings down to submerge any product. When not in use, it stays securely in a vertical position. Use the submerger for any products that need to fry completely under the shortening, either part time or full time. These include ball shaped donuts, loukoumades, and hushpuppies. The Submerger Screen is optional with new fryers.
Belshaw Belshaw SF24 Shortening Filter includes rinse hose only $5,000.00 $5,002.50
FILTERS SHORTENING FROM 624 AND 724CG/FG FRYERS. NOT RECOMMENDED FOR TRANS-FAT FREE SHORTENING. Compatible with 624, 724CG and 724FG fryers. Not recommended for trans-fat free shortening - this type of shortening becomes solid very quickly and can cause pump blockages. Uses a long-life synthetic filter screen that needs only annual replacement under normal operating conditions Heavy duty pump and motor for pumping back shortening to the fryer after filtering Foot pedal switch for activating pump Includes hand held rinse hose for rinsing debris from bottom of fryer and for refilling fryer Slides under compatible floor and tabletop fryers Heavy duty stainless steel frame, tank and casters Shortening reservoir is removeable for periodic cleaning SF Shortening Filters are not designed for Zero Trans Fat shortenings. These shortenings solidify as they cool down, sometimes causing blockages in the filter pump. Belshaw recommends the EZMelt24 Melter-Filter for Zero Trans Fat shortenings. The EZMelt contains a heating element to liquify any shortening. 120V or 240V, 50 or 60 Hz, 1-Phase Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889
Belshaw Belshaw EZ MELT 24 (Heated) Shortening Melter-Filter includes fill and rinse hose $5,600.00
Belshaw EZ MELT 24 (Heated) Shortening Melter-Filter includes fill and rinse hose THE BEST FILTRATION SYSTEM FOR 624 AND 724CG/FG FRYERS. MELTS, FILTERS, AND PUMPS BACK ON DEMAND. Compatible with 624, 724CG, and 724FG fryers. The EZMelt filtration system is the only filtration system recommended if you use Trans Fat-free shortening. The EZMelt24 is a recycling filter that heats shortening in the tank, with the following benefits: If Zero Trans Fat shortenings are used, they gradually become thicker at normal bakery temperatures. This can lead to pump blockages and failures with standard filters. Using the heated EZ Melt overcomes this problem. Pumping reheated shortening through a fixed connection to the fryer is faster and safer than any other method, such as dropping in shortening blocks. The EZMelt does this using a refill hose (optional) which attaches directly to a Belshaw fryer. Standard features Compatible with Belshaw's open kettle 624, 724CG, and 724FG fryers. Can be used with any standard donut shortening including Zero Trans Fat shortening Heating element with factory set thermostat to 225°F/107°C. Element tilts up for easy tank cleaning. The tank itself is readily removable. Long-life synthetic filter screen that needs only annual replacement under normal operating conditions. Heavy-duty pump & motor for pumping shortening to the fryer on-demand Heavy-duty, moisture repellent foot switch for activating the pump Cube cutter for fast melting of solid shortening blocks up to 50lbs (22.7kg) Handheld rinse hose with heat resistant handle Optional Refill Hose - allows regular topping up of fryer through a fixed connection to the fryer. The refill hose can be left in place on a Belshaw fryer at all times allowing frequent topping up of shortening level High-temperature limit switch Stainless steel frame, tank, and casters 120V or 240V, 50 or 60 Hz, 1-Phase Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889 Disclaimer *This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary. * 1-year parts and labor cost limited warranty (see attached media)
Belshaw 23" x 23" Screen With Handles made by Belshaw $377.12 $405.50
23" x 23" Screen With Handles made by Belshaw Screens with bolt-on handles. These are for cake donuts only. (Two screens are supplied standard with each new floor model fryer). These stainless steel screens allow for quick release of cake donut batter and make the frying process easier. Quickly remove the finished product from the fryer and move to the glazer using the handles that are designed to stay cool in the fryer. The reinforced woven screen is both durable and constructed of quality materials by Belshaw. Belshaw Adamatic by Unisource Frying Screen with Handles for 624/724 Fryers 23" x 23" is perfect for your establishment. Wire mesh, nickel plated steel, welded.
Belshaw Belshaw 23 X 23 INCHES Fry Screen (58 X 58 CM). FOR PROOFING AND FRYING. $80.35
Belshaw 23 X 23 INCHES Fry Screen (58 X 58 CM). USED FOR PROOFING AND FRYING. Proofing and Frying Screens are standard screens without handles. They are mostly used for yeast-raised donuts in situations where screens with handles will not fit easily into a proofer. To raise and lower these screens, use Detachable Screen Handles (616-0007C) For 624, 724CG and 724FG Fryers. 12 to 36 screens needed per fryer, depending on usage nickel chrome