sale
634 DONUT FRYER (ELECTRIC) 634 DONUT FRYER (ELECTRIC)
Belshaw
634 DONUT FRYER (ELECTRIC) from $13,750.00 $11,314.85
634 DONUT FRYER (ELECTRIC) Electric heated, frying size 34 x 24 inches (46 x 66 cm). This industry standard electric donut fryer is used by concessions, donut shops and bakeries all over North America and the world! The fryer holds 35-48 donuts depending on size, and has a production capacity of approximately 100-135 dozen donuts per hour. Frying size 34 x 24 inches (86 x 61 cm) Fryer capacity (large donuts) 40 donuts up to 4¼ inch diameter (108 mm) Fryer capacity (medium donuts) 54 donuts up to 3½ inch diameter (89 mm) Production capacity (large donuts) 100 dozen/hour @120 seconds frying time Production capacity (medium donuts) 135 dozen/hour @120 seconds frying time Shortening capacity 197 lbs | 26.5 gallons (90 kg | 100 L) Power 208-240 Volts, 3 phase (other voltages available) Certifications UL, NSF, CSA, CE Compatibility Worldwide Frying Area 34 x 24 inches (86 x 61 cm). Shortening capacity 197 lbs. by weight, 26.5 gallons by volume (90 kg/100 liters). Capacity 35-48 donuts depending on size. Production rate at full capacity, 90-120 dozen donuts per hour @120 seconds frying time. 208-240 Volts, 50/60Hz, 1-phase or 3-phase (other voltages available). Heavy duty elements, tiltable upwards for easy kettle cleanup. Electronic temperature controller for high accuracy, low fluctuation. High-temperature shut-off switch set to approximately 450° F (230° C). Stainless steel cabinet, kettle, and drain tray, with sloping surface around fryer kettle. Adjustable, bolt-down legs. Drain tray on right side of fryer (can easily be repositioned on left side). 2 high-quality nickel-plated donut frying screens supplied with handles. Heavy duty drain and valve with exterior handle to empty shortening. Accommodates EZMelt34 of SF34 Shortening filter underneath fryer. Accommodates Type B or Type F cake donut depositor. (Optional) Submerger screen #634-1521, recommended for ball shaped donuts and all products that need full frying coverage. ETL certified to UL-197, CSA C22.2 and NSF-4. CE models available for European Union and other countries See PDF tab for more specifications. See below for optional accessories for your donut fryer. A ventilation and fire suppression hood are normally required for indoor locations.
sale
Submerger Screens For Belshaw Electric Donut Fryers (3 Options) Submerger Screens For Belshaw Electric Donut Fryers (3 Options)
Belshaw
Submerger Screens For Belshaw Electric Donut Fryers (3 Options) from $827.00 $897.00
SUBMERGER SCREEN FOR ELECTRIC FRYERS Submerges products below the shortening. Available in 3 sizes. Available in 3 sizes to fit Belshaw Open Kettle fryers 618L, 624  and 634. It holds any fried product below the shortening. It is hinged to the back of the fryer and swings down to submerge any product. When not in use, it stays securely in a vertical position. Use the submerger for any products that need to fry completely under the shortening, either part time or full time. These include ball shaped donuts, loukoumades, and hushpuppies. The submerger Screen is optional with new fryers. Part #618L-1521 Submerger screen for 618L Fryer, 17 x 25 inches Part #624-1521 Submerger screen for 624 Fryer, 23 x 23 inches Part #634-1530 Submerger screen for 634 Fryer, 33 x23 inches
15% sale
Belshaw Ez Melt 34 (Includes Rinse Hose Only)
Belshaw
Belshaw Ez Melt 34 (Includes Rinse Hose Only) $6,100.00 $5,290.00
Belshaw EZ Melt 34 (Includes Rinse Hose Only)   THE BEST FILTRATION SYSTEM FOR 734CG, 734FG, MELTS, FILTERS, AND PUMPS BACK ON DEMAND.  Compatible with 734CG and 734FG fryers, and Donut Robot® Mark VI. The EZMelt filtration system is the only filtration system recommended if you use Trans Fat-free shortening. The EZMelt34 is a recycling filter that heats shortening in the tank, with these benefits: If Zero Trans Fat shortenings are used, they gradually become thicker at normal bakery temperatures. This can lead to pump blockages and failures with standard filters. Using the heated EZ Melt overcomes this problem. Pumping reheated shortening through a fixed connection to the fryer is faster and safer than any other method, such as dropping in shortening blocks. The EZMelt does this using a refill hose (optional) which attaches directly to a Belshaw fryer. Standard features: Capacity 31.25 gallons (118 Liters), approximately equivalent to 225 lbs (102 kg) shortening. Compatible with Belshaw's floor model 734LFG and 734LCG fryers, and with Donut Robot® Mark VI. For other brand fryers, check capacity and dimensions to determine compatibility. Can be used with any standard donut shortening including Zero Trans Fat shortening. Heating element with factory set thermostat to 225‚°F/107‚°C. Element tilts up for easy tank cleaning. The tank itself is readily removable. Long-life synthetic filter screen that needs only annual replacement under normal operating conditions.Heavy-duty pump & motor for pumping shortening to the fryer on demand. Heavy-duty, moisture repellent foot switch for activating the pump. Cube cutter for fast melting of solid shortening blocks up to 50lbs (22.7kg)Handheld rinse hose with heat resistant handle. Optional Refill Hose - allows regular topping up of fryer through a fixed connection to the fryer. The refill hose can be left in place on a Belshaw fryer at all times allowing frequent topping up of shortening level. High-temperature limit switch. 120V or 240V, 50 or 60 Hz, 1-Phase. Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889. Product Details Heats shortening to 225 F or 107 C Works with long-life synthetic filter screen replacement recommended once per year under normal conditions Pumps shortening to the fryer on demand Refill shortening with the push of the foot pedal Two hoses connected to the unit fill hose and rinse hose Comes with cub cutter for fast melting of solid shortening block up to 50lbs(22.7kg) Attached mobile casters for easy movement 120v or 240v,50 or60hz ,1-phase   Disclaimer *This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary. * 1-year parts and labor cost limited warranty (see attached media)
Belshaw SF34 Filter includes rinse hose only
Belshaw
Belshaw SF34 Filter includes rinse hose only $5,500.00
SF34 Shortening Filter Filters shortening from 734CG and 734FG fryers. Not recommended for trans-fat free shortening. Compatible with 734CG and 734FG fryers. Not recommended for trans-fat free shortening - this type of shortening becomes solid very quickly and can cause pump blockages. Uses a long-life synthetic filter screen that needs only annual replacement under normal operating conditions Heavy duty pump and motor for pumping back shortening to the fryer after filtering Foot pedal switch for activating pump Includes hand held rinse hose for rinsing debris from bottom of fryer and for refilling fryer Slides under compatible floor and tabletop fryers Heavy duty stainless steel frame, tank and casters Shortening reservoir is removable for periodic cleaning SF Shortening Filters are not designed for Zero Trans Fat shortenings. These shortenings solidify as they cool down, sometimes causing blockages in the filter pump. Belshaw recommends the EZMelt34 Melter-Filter for Zero Trans Fat shortenings. The EZMelt contains a heating element to liquefy any shortening. 120V or 240V, 50 or 60 Hz, 1-Phase Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889
-6% sale
33
Belshaw Adamatic
33" x 23" Screen With Handles made by Belshaw $412.55 $438.27
33" x 23" Screen With Handles made by Belshaw • High quality plated finish w/ Electroless Nickel .0005 • 4-mesh #18 wire • All welded intersections • For proofing and frying donuts and similar products Belshaw Adamatic by Unisource Frying Screen with Handles for 634/734 Fryers 34" x 24" is perfect for your establishment.
-16% sale
Belshaw 33 x 23 inches Fry Screen. Used for proofing and frying.
Belshaw Adamatic
Belshaw 33 x 23 inches Fry Screen. Used for proofing and frying. $126.04 $148.70
Proofing and Frying Screens are standard screens without handles. They are mostly used for yeast-raised donuts in situations where screens with handles will not fit easily into a proofer. To raise and lower these screens, use Detachable Screen Handles (634-0013A) For 634, 734 Fryers. 12 to 36 screens needed per fryer, depending on usage.