sale
724FG Donut Fryer by Belshaw ( Natural Gas, Standing Pilot (No Power) 724FG Donut Fryer by Belshaw ( Natural Gas, Standing Pilot (No Power)
Belshaw
724FG Donut Fryer by Belshaw ( Natural Gas, Standing Pilot (No Power) from $8,800.00 $10,062.50
724FG Donut Fryer by Belshaw ( Natural Gas, Standing Pilot (No Power) This industry-standard donut fryer is used by donut shops and bakeries all over North America and the world! The fryer holds 36 standard size cake or yeast-raised donuts and has a capacity of approximately 80-100 dozen donuts/hour. The standard 724CG model uses an electrical source for electronic ignition. 724FG model does not require an electrical connection. Product Details Open Kettle Gas Fryer, frying area 24” x 24” (61cm x 61cm) 60,000 BTU with 'Omron' temperature controller Shortening capacity 119lbs (54kg), approx 16 gallons Holds 25-36 standard donuts Capacity approx 80-120 dozen donuts per hour Drain tray and cover open on the right side (field reversible) 2 screens w/handles Drain valve with exterior handle ETL listed to NSF4 - ANSI Z83 - CSA1.8a Disclaimer *Accessories sold separately  *This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary. * 1-year parts and labor cost limited warranty see (attached media)
Belshaw EZ MELT 24 (Heated) Shortening Melter-Filter includes fill and rinse hose Belshaw EZ MELT 24 (Heated) Shortening Melter-Filter includes fill and rinse hose
Belshaw
Belshaw EZ MELT 24 (Heated) Shortening Melter-Filter includes fill and rinse hose $5,600.00
Belshaw EZ MELT 24 (Heated) Shortening Melter-Filter includes fill and rinse hose THE BEST FILTRATION SYSTEM FOR 624 AND 724CG/FG FRYERS. MELTS, FILTERS, AND PUMPS BACK ON DEMAND. Compatible with 624, 724CG, and 724FG fryers. The EZMelt filtration system is the only filtration system recommended if you use Trans Fat-free shortening. The EZMelt24 is a recycling filter that heats shortening in the tank, with the following benefits: If Zero Trans Fat shortenings are used, they gradually become thicker at normal bakery temperatures. This can lead to pump blockages and failures with standard filters. Using the heated EZ Melt overcomes this problem. Pumping reheated shortening through a fixed connection to the fryer is faster and safer than any other method, such as dropping in shortening blocks. The EZMelt does this using a refill hose (optional) which attaches directly to a Belshaw fryer. Standard features Compatible with Belshaw's open kettle 624, 724CG, and 724FG fryers. Can be used with any standard donut shortening including Zero Trans Fat shortening Heating element with factory set thermostat to 225°F/107°C. Element tilts up for easy tank cleaning. The tank itself is readily removable. Long-life synthetic filter screen that needs only annual replacement under normal operating conditions. Heavy-duty pump & motor for pumping shortening to the fryer on-demand Heavy-duty, moisture repellent foot switch for activating the pump Cube cutter for fast melting of solid shortening blocks up to 50lbs (22.7kg) Handheld rinse hose with heat resistant handle Optional Refill Hose - allows regular topping up of fryer through a fixed connection to the fryer. The refill hose can be left in place on a Belshaw fryer at all times allowing frequent topping up of shortening level High-temperature limit switch Stainless steel frame, tank, and casters 120V or 240V, 50 or 60 Hz, 1-Phase Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889 Disclaimer *This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary. * 1-year parts and labor cost limited warranty (see attached media)
-1% sale
Belshaw SF24 Shortening Filter includes rinse hose only Belshaw SF24 Shortening Filter includes rinse hose only
Belshaw
Belshaw SF24 Shortening Filter includes rinse hose only $5,000.00 $5,002.50
FILTERS SHORTENING FROM 624 AND 724CG/FG FRYERS. NOT RECOMMENDED FOR TRANS-FAT FREE SHORTENING. Compatible with 624, 724CG and 724FG fryers. Not recommended for trans-fat free shortening - this type of shortening becomes solid very quickly and can cause pump blockages. Uses a long-life synthetic filter screen that needs only annual replacement under normal operating conditions Heavy duty pump and motor for pumping back shortening to the fryer after filtering Foot pedal switch for activating pump Includes hand held rinse hose for rinsing debris from bottom of fryer and for refilling fryer Slides under compatible floor and tabletop fryers Heavy duty stainless steel frame, tank and casters Shortening reservoir is removeable for periodic cleaning SF Shortening Filters are not designed for Zero Trans Fat shortenings. These shortenings solidify as they cool down, sometimes causing blockages in the filter pump. Belshaw recommends the EZMelt24 Melter-Filter for Zero Trans Fat shortenings. The EZMelt contains a heating element to liquify any shortening. 120V or 240V, 50 or 60 Hz, 1-Phase Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889
sale
Draft Inducer Kit For Gas or Propane Fryers 718L ,724, 734 Used Above 3000ft Altitude Draft Inducer Kit For Gas or Propane Fryers 718L ,724, 734 Used Above 3000ft Altitude
Belshaw
Draft Inducer Kit For Gas or Propane Fryers 718L ,724, 734 Used Above 3000ft Altitude from $2,151.00 $9,372.50
DRAFT INDUCER KIT FOR GAS FRYERS For Propane heated fryers, and Natural Gas above 3,000 feet. Available in 3 sizes and Voltages. The draft inducer ensures that gas combustion exhaust is vented through the exhaust flue at the back of your fryer so that air quality is not compromised. It's recommended for all 718L, 724 and 734 gas open kettle fryers that are heated with Propane, and for Natural Gas heated fryers located 3,000 feet ( 915 meters) or more in altitude. The Draft Inducer is pre-installed for new equipment, or can be added by a technician. 
sale
Submerger Screens For Belshaw Gas  Donut Fryers (3 Options)
Federal
Submerger Screens For Belshaw Gas Donut Fryers (3 Options) from $720.00 $805.00
SUBMERGER SCREEN FOR GAS FRYERS Submerges products below the shortening. Available in 3 sizes. Available in 3 sizes to fit Belshaw Open Kettle fryers 718L, 724 and 734 (CG and FG models). It holds any fried product below the shortening. It is hinged to the back of the fryer and swings down to submerge any product. When not in use, it stays securely in a vertical position. Use the submerger for any products that need to fry completely under the shortening, either part time or full time. These include ball shaped donuts, loukoumades, and hushpuppies. The Submerger Screen is optional with new fryers. The photo is of the 718 Submerge Screen, the other 2 sizes will be shaped proportionate to the size of fryer the submerger is being ordered for.   Part #718LG-1541 Submerger screen for 718LCG, 718LFG, 17 x 25 inches Part #724G-1547 Submerger screen for 724CG, 724FG, 23 x 23 inches Part #734G-1536 Submerger screen for 734CG, 734FG, 33 x 23 inches  
-7% sale
23
Belshaw
23" x 23" Screen With Handles made by Belshaw $377.12 $405.50
23" x 23" Screen With Handles made by Belshaw Screens with bolt-on handles. These are for cake donuts only. (Two screens are supplied standard with each new floor model fryer). These stainless steel screens allow for quick release of cake donut batter and make the frying process easier. Quickly remove the finished product from the fryer and move to the glazer using the handles that are designed to stay cool in the fryer. The reinforced woven screen is both durable and constructed of quality materials by Belshaw. Belshaw Adamatic by Unisource Frying Screen with Handles for 624/724 Fryers 23" x 23" is perfect for your establishment.   Wire mesh, nickel plated steel, welded.  
-14% sale
Belshaw Submerger for 724CG / 724 FG (Frying area 24
Belshaw Adamatic
Belshaw Submerger for 724CG / 724 FG (Frying area 24" x 24") $637.00 $732.55
Item 724G-1547 for Belshaw 24" x 24" gas or propane fryer (724CG / 724 FG). Item is not an in stock item and will take approximately 3 weeks from order. Photo shows the top of the fryer for example only. The submerge will insert into the brackets on your current Belshaw (724CG/724FG) fryer. The fryer top is not included. This is for the screen and the hinged handle. The diagram shows the rectangular screen however this is for the Square Submerge Screen.
Belshaw 23 X 23 INCHES Fry Screen (58 X 58 CM). FOR PROOFING AND FRYING.
Belshaw
Belshaw 23 X 23 INCHES Fry Screen (58 X 58 CM). FOR PROOFING AND FRYING. $80.35
Belshaw 23 X 23 INCHES Fry Screen (58 X 58 CM). USED FOR PROOFING AND FRYING. Proofing and Frying Screens are standard screens without handles. They are mostly used for yeast-raised donuts in situations where screens with handles will not fit easily into a proofer. To raise and lower these screens, use Detachable Screen Handles (616-0007C) For 624, 724CG and 724FG Fryers. 12 to 36 screens needed per fryer, depending on usage nickel chrome
sale
724CG Donut Fryer (Natural Gas, Electronic Controller, 120V) 724CG Donut Fryer (Natural Gas, Electronic Controller, 120V)
Belshaw
724CG Donut Fryer (Natural Gas, Electronic Controller, 120V) from $9,300.00 $10,292.50
724CG-724FG DONUT FRYER (GAS) Gas heated, frying size 24 x24 inches (61 x 61 cm). Belshaw open kettle fryers are the top choice for convenience, flexibility, heat accuracy and long service life. 724 model fryers hold 25 large or 36 medium-size donuts. For that reason you should choose carefully between the 724 and 718L Fryer. The 724 is particularly useful for medium size donuts up to 3¾ inches in diameter (95 mm), because it holds 3 dozen donuts, compared to 2 dozen for the 718L fryer. The screens used will be different, and so will any baking racks. You'll need 23 x 23 inch screens for this fryer, and baking racks to hold them. Each fryer comes with two screens with handles. This industry standard donut fryer is used by donut shops and bakeries all over North America and the world! The fryer holds 36 standard size cake or yeast-raised donuts and has a capacity of approximately 80-100 dozen donuts/hour. The standard 724CG model uses an electrical source for electronic ignition. 724FG model does not require an electrical connection. Frying Area 24 x 24 inches (61 x 61 cm) Gas heated at 60,000 BTU/hr Shortening capacity 119 lbs by weight, 16 gallons by volume (54 kg/61 liters) Capacity 36 standard donuts, approximately 80-100 dozen donuts per hour A conversion kit is available if changeover is needed 120 Volts or 240 Volts, 50/60Hz, 1-phase. (specify when ordering) Digital electronic thermostat control Drain tray on right side of fryer. Can be moved to left side Drain and valve with exterior handle to empty shortening 2 cake donut frying screens with handles ETL certified to NSF-4, ANSI Z83.11a and CSA1.8a.2004 (Optional) Standing pilot ignition and thermocouple temperature control with no electricity required. This models is designated: 724FG A ventilation and fire suppression hood is usually required for indoor locations. This model operates under 3,000ft above sea level
-12% sale
Belshaw Filter Bag for the SF18/ SF24/ EZMelt 18/ EZMelt 24
Belshaw
Belshaw Filter Bag for the SF18/ SF24/ EZMelt 18/ EZMelt 24 $138.00 $155.25
The bag is supplied standard with new Filtration Systems but it is wise to have a backup. This is also the replacement after your filter's First Year. Polypropylene filter bag designed for one year of use under normal conditions if properly handled. Belshaw Adamatic Replacement Filter Bag only, Standard [SM100-0002] is perfect for your establishment. For the SF18 / SF24 / EZMelt 18 / EZMelt 24