Hopper and plunger set for mini donuts (Mini donuts conversion Kit). The Mini Donut Conversion Kit is made up of exactly the same hopper and plunger combination used by Donut Robot ® GP models. You can use the kit with standard Donut Robot ® models to change back and forth between standard size donuts and mini donuts. It includes a Mini Donut Hopper and 1-inch Double Plunger. Your machine will use the same conveyor, so it will not make mini donuts quite as fast as a GP machine. Definitely worth getting if you would like the flexibility to make both full size and mini donuts! If your donut robot is older than 2001, please call us at 918-739-4380 to determine compatibility.

BELSHAW "MINI" Donut Robot Standard Hopper (Without Plunger)  With this extra Donut Robot extra "mini" Hopper (Plunger not included) You can run more flavors making your lineup by just switching to this extra hopper making your operation more streamlined by switching out hoppers for different donuts lineups, all while your operation more efficient. Plunger sold separately  MK-1024X Donut Robot standard hopper (w/o plunger)

BELSHAW 13/16 Donut Robot Standard Hopper (Without Plunger)  With this extra Donut Robot extra Standard Hopper (Plunger not included) You can run more flavors making your lineup by just switching to this extra hopper making your operation more streamlined by switching out hoppers for different donuts lineups, all while your operation more efficient. Plunger sold separately  MK-1025X1-13/16 Donut Robot standard hopper (w/o plunger)

Description: The Dual Depositor Kit can be installed on the Mark VI fryer (or Mark VI 'Deep' fryer) at the time of manufacture or can be retrofitted to existing Mark VI fryers. The Dual Depositor Kit automatically deposits 4 cake donuts in each conveyor row of the Mark VI fryer. It is a labor-saving alternative to using a Belshaw Type F depositor and produces well-formed, high quality cake donuts. The operator has only to fill the hoppers with batter, and the depositors do the rest automatically. The Dual Depositor Kit makes standard size ring donuts only. You cannot make mini donuts using the kit. The serial number for the retro kit must start with the number 2000 or higher Production Capacity: up to 112 dozen/hr • Donut Robot® Mark VI fryer with dual depositor: 112 dozen cake donuts per hour. • Donut Robot® Mark VI 'Deep' fryer with dual depositor: 91 dozen cake donuts per hour (because Flight Bars are spaced further apart) Production capacity is estimated at 95-second frying time. Actual production rate will vary depending on size and composition of donuts, frying time, frying temperature and percentage of capacity used. What is Included •(2) Donut Robot® depositors. Each depositor is equipped with a hopper* and 1-9/16" plunger. This plunger can normally produce ring donuts up to 3-1/2" average diameter, and 1-3/4 oz. average weight. •2 depositor mounting systems • New motor, compatible with dual depositor system • All necessary hardware such as nuts, bolts and washers •Template for installing retrofit dual depositor kit. (for Retrofits only) * Note: Hopper is not compatible with standard Donut Robot hoppers Electrical The Dual Depositor system connects directly to the Mark VI fryer and does not require any external power source. For retrofits, an experienced electrician or equipment technician may be needed to replace the fryer motor inside the control panel of the machine. Ordering information Order the Dual Depositor kit from your Belshaw distributor using one of these part numbers • Part Number: MKVI-1300. For pre-installation on new Mark VI fryer •Each carton 16"x16"x22", approx 35 lbs (41x41x56 cm, 16 kg)

2 options available in Variants for the; Mark II or the Mark V/ Mark VI Belshaw Fryer Drain Valve for the Supporting Table for the Donut Robot, The EZMelt Filter, and Rack Loader or Roto-Cooler. All Donut Robots except gas models have a short drain with a heavy duty metal cap attached to it, to close it off. This Drain and Valve can be attached to the fryer, instead of the threaded cap. To use the drain and valve, you will need: A hole in the table that holds your fryer to allow the drain and valve to extend through it, enough room under the fryer for the Drain and Valve. The Drain and Valve extends 18" (46cm) below the fryer kettle. If you have this room, it will save A LOT of time and trouble emptying shortening. Instead of siphoning, just let the drain do the work. If you use the Drain and Valve when filtering shortening, you will need a filtration system to remove debris from the shortening. You can use a Belshaw EZMelt 18 or any other effective method. If you have room for the Drain and Valve, it will save A LOT of time and trouble emptying shortening. If you do not have this room under the fryer, the drain and valve will probably not help you, and you should consider the Filter Flo siphon (above) instead. The drain cap that comes standard is NOT designed to screw on and off when you empty shortening. Part # MKVI-0546

The Mini Donut Hopper is a similar size, shape of hopper used by Donut Robot ® GP models. You can use this with standard Donut Robot ® models to change back and forth between standard size donuts and mini donuts with the plunger (not included). It includes the Mini Donut Hopper only!This can also be used by operators that want the ease and convenience of having a second hopper.

RACK LOADER Simple, efficient method of collecting donuts from Donut Robot® fryers onto glazing screens. The Roto-Cooler looks better, the Rack Loader is more efficient! The Rack Loader is compatible with Donut Robot® Mark II, Mark II Gas, and Mark V and Mark VI. The Rack Loader is all about productivity and speed. If you need to glaze or ice donuts, or if you want to put the donuts into a baking rack temporarily, the Rack Loader is the helper that you need.  The Rack Loader stores about 10 or more screens in a stack. As one screen fills up, remove it - the next screen is underneath and ready to take its place. Each screen holds 24 donuts. Screens are 17" x 25" and fit into a standard baking rack.

1-9/16 inch diameter Plain Plunger, for Donut Robot ® Mark II, Mark II Gas, and Mark V

The Support Table is designed to safely support all Donut Robot ® fryers, Roto-Cooler (or Rack Loader), and EZMelt. It has holes and bolt holes to accept fryers and equipment underneath such as the EZMelt filter. Also has shelf storage for screens and other accessories such as the Roto-Cooler. Support Table for the Mark VI (MK6-1005) - used with the FT6-1004 Support Table for the Feed Table with pre-machined holes Designed to withstand the weight of the fryer and the weight of the cooking oil. Don't allow yourself to purchase a standard stainless worktable and take the chance of causing an accident from the table not supporting the weight of the equipment and supplies. This is made of heavy duty Stainless Steel and Square Tubing. Supports the Mark VI fryer from Belshaw , with a storage area for the EZ Melt 34 Filteration System, and the RL18 Rack Loader. The rack also provides storage area for Shortening, Glaze, Screens and assorted items. Belshaw Adamatic MK6-1005 88 5/16 x 33 3/16" x 36

Belshaw Roto Cooler System Belshaw's Roto-Cooler is the most practical way to collect, hold and cool donuts fried on. The standard Roto-Cooler is large enough to hold in excess of 75 donuts, giving the operator plenty of time to complete other jobs before transferring the contents. They tray is white polyethylene and easy to clean.

RACK LOADER With Extra Height for Gas Models Simple, efficient method of collecting donuts from Donut Robot® fryers onto glazing screens. The Roto-Cooler looks better, the Rack Loader is more efficient! The Rack Loader is compatible with Donut Robot® Mark II, Mark II Gas, and Mark V and Mark VI. The Rack Loader is all about productivity and speed. If you need to glaze or ice donuts, or if you want to put the donuts into a baking rack temporarily, the Rack Loader is the helper that you need.  The Rack Loader stores about 10 or more screens in a stack. As one screen fills up, remove it - the next screen is underneath and ready to take its place. Each screen holds 24 donuts. Screens are 17" x 25" and fit into a standard baking rack.

1-inch diameter double plunger for Mini Donuts, for Donut Robot ® Mark II GP, Mark II GP Gas, and Mark V GP. Must be used with the mini donut hopper. It takes less than 1 minute to change from making regular donuts to mini donuts. 4 mini donuts are deposited on each conveyor row - identical to those produced by our mini donut-specific 'GP' models. It's like having two machines in one!

BELSHAW 9/16 Donut Robot Standard Hopper (Without Plunger)  With this extra Donut Robot extra Standard Hopper(Plunger not included) You can run more flavors making your lineup by just switching to this extra hopper making your operation more streamlined by switching out hoppers for different donuts lineups, all while your operation more efficient. Plunger sold separately  MK-1025X1-9/16 Donut Robot standard hopper (w/o plunger)