The Model 330DD Donut Production Table only requires 96" floor space. This space saving design provides many options for operator floor plan design. The donut production table eliminates slow and ununiform production of hand cut donuts. The 330DD quickly pays for itself due to the reduction of labor cost when utilizing the quick and simple sheeting and cutting process of the ACME 330DD.The 330DD model is made in both Left to Right and Right to Left operation.  * The photo shown is a Right to Left model where the adjustments are on the (Right) side of the sheeter, the operator moves to the left to move toward the cutter. The infeed conveyor moves dough to sheeting rollers, as the dough is formed into a consistent thickness for cutting. Stainless Steel construction with heavy duty sealed bearings. Variable speed drive for the conveyor belts and the cutter allowing the operator to control the speed of the sheeter. The sheeter comes with the cutting station, dough guide on the infeed table and the flour reserve bin. The cutting conveyor speed range is 1-38 cm/ sec or 2-20 feet per minute. The ACME 330D utilizes a .75 Horsepower motor @ .56KW.  Shipping Weight is 1050 LBS.  Electrical - 200-240, 50/60HZ Single Phase 3.8 Amps or 100-120V, 50/60 Hz, Single Phase 3.8 Amps. Product ships directly from the manufacturer 

The Model 330DD Donut Production Table only requires 96" floor space. This space saving design provides many options for operator floor plan design. The donut production table eliminates slow and ununiform production of hand cut donuts. The 330DD quickly pays for itself due to the reduction of labor cost when utilizing the quick and simple sheeting and cutting process of the ACME 330DD.The 330DD model is made in both Left to Right and Right to Left operation.  * The photo shown is a Right to Left model where the adjustments are on the (Right) side of the sheeter, the operator moves to the left to move toward the cutter. The infeed conveyor moves dough to sheeting rollers, as the dough is formed into a consistent thickness for cutting. Stainless Steel construction with heavy duty sealed bearings. Variable speed drive for the conveyor belts and the cutter allowing the operator to control the speed of the sheeter. The sheeter comes with the cutting station, dough guide on the infeed table and the flour reserve bin. The cutting conveyor speed range is 1-38 cm/ sec or 2-20 feet per minute. The ACME 330D utilizes a .75 Horsepower motor @ .56KW.  Shipping Weight is 1050 LBS.  Electrical - 200-240, 50/60HZ Single Phase 3.8 Amps or 100-120V, 50/60 Hz, Single Phase 3.8 Amps. Product ships directly from the manufacturer 

* Includes Doughnut Cutter Assembly for the 26" Shaft Rotary Cutters- * Left to Right production indicates that you are standing at the front (where dough has been cut) of the machine looking to the back of the machine (where the rollers are placed) and you will be working the dough from the left side of the machine. This will have the dough roller adjustment controls and belt speed on the left side of the machine. (Photo has controls on the right side) The Model 330DD Donut Production Table only requires 96" floor space. This space saving design provides many options for operator floor plan design. The donut production table eliminates slow and ununiform production of hand cut donuts. The 330DD quickly pays for itself due to the reduction of labor cost when utilizing the quick and simple sheeting and cutting process of the ACME 330DD.The 330DD model is made in both Left to Right and Right to Left operation.  * The photo shown is a Right to Left model where the adjustments are on the (Right) side of the sheeter, the operator moves to the left to move toward the cutter. The infeed conveyor moves dough to sheeting rollers, as the dough is formed into a consistent thickness for cutting. Stainless Steel construction with heavy duty sealed bearings. Variable speed drive for the conveyor belts and the cutter allowing the operator to control the speed of the sheeter. The sheeter comes with the cutting station, dough guide on the infeed table and the flour reserve bin. The cutting conveyor speed range is 1-38 cm/ sec or 2-20 feet per minute. The ACME 330D utilizes a .75 Horsepower motor @ .56KW.  Shipping Weight is 1050 LBS.  Electrical - 200-240, 50/60HZ Single Phase 3.8 Amps or 100-120V, 50/60 Hz, Single Phase 3.8 Amps. Product ships directly from the manufacturer 

The Model 330 Donut Production Table only requires 72" floor space. This space saving design provides many options for operator floor plan design. The donut production table eliminates slow and ununiform production of hand cut donuts. The 330D quickly pays for itself due to the reduction of labor cost when utilizing the quick and simple sheeting and cutting process of the ACME 330D.The 330D model is made in both Left to Right and Right to Left operation.  * The photo shown is a Right to Left model where the adjustments are on the (Right) side of the sheeter, the operator moves to the left to move toward the cutter. The infeed conveyor moves dough to sheeting rollers, as the dough is formed into a consistent thickness for cutting. Stainless Steel construction with heavy duty sealed bearings. Variable speed drive for the conveyor belts and the cutter allowing the operator to control the speed of the sheeter. The sheeter comes with the cutting station, dough guide on the infeed table and the flour reserve bin. The cutting conveyor speed range is 1-38 cm/ sec or 2-20 feet per minute. The ACME 330D utilizes a .75 Horsepower motor @ .56KW.  Shipping Weight is 950 LBS.  Electrical - 200-240, 50/60HZ Single Phase 3.8 Amps or 100-120V, 50/60 Hz, Single Phase 3.8 Amps. Product ships directly from the manufacturer 

The Model 330 Donut Production Table only requires 72" floor space. This space saving design provides many options for operator floor plan design. The donut production table eliminates slow and ununiform production of hand cut donuts. The 330D quickly pays for itself due to the reduction of labor cost when utilizing the quick and simple sheeting and cutting process of the ACME 330D.The 330D model is made in both Left to Right and Right to Left operation.  * The photo shown is a Right to Left model where the adjustments are on the (Right) side of the sheeter, the operator moves to the left to move toward the cutter. The infeed conveyor moves dough to sheeting rollers, as the dough is formed into a consistent thickness for cutting. Stainless Steel construction with heavy duty sealed bearings. Variable speed drive for the conveyor belts and the cutter allowing the operator to control the speed of the sheeter. The sheeter comes with the cutting station, dough guide on the infeed table and the flour reserve bin. The cutting conveyor speed range is 1-38 cm/ sec or 2-20 feet per minute. The ACME 330D utilizes a .75 Horsepower motor @ .56KW.  Shipping Weight is 950 LBS.  Electrical - 200-240, 50/60HZ Single Phase 3.8 Amps or 100-120V, 50/60 Hz, Single Phase 3.8 Amps. Product ships directly from the manufacturer 

The Model 330 Donut Production Table only requires 72" floor space. This space saving design provides many options for operator floor plan design. The donut production table eliminates slow and ununiform production of hand cut donuts. The 330D quickly pays for itself due to the reduction of labor cost when utilizing the quick and simple sheeting and cutting process of the ACME 330D.The 330D model is made in both Left to Right and Right to Left operation.  * The photo shown is a Right to Left model where the adjustments are on the (Right) side of the sheeter, the operator moves to the left to move toward the cutter. The infeed conveyor moves dough to sheeting rollers, as the dough is formed into a consistent thickness for cutting. Stainless Steel construction with heavy duty sealed bearings. Variable speed drive for the conveyor belts and the cutter allowing the operator to control the speed of the sheeter. The sheeter comes with the cutting station, dough guide on the infeed table and the flour reserve bin. The cutting conveyor speed range is 1-38 cm/ sec or 2-20 feet per minute. The ACME 330D utilizes a .75 Horsepower motor @ .56KW.  Shipping Weight is 950 LBS.  Electrical - 200-240, 50/60HZ Single Phase 3.8 Amps or 100-120V, 50/60 Hz, Single Phase 3.8 Amps. Product ships directly from the manufacturer 

The Model 330 Donut Production Table only requires 72" floor space. This space saving design provides many options for operator floor plan design. The donut production table eliminates slow and ununiform production of hand cut donuts. The 330D quickly pays for itself due to the reduction of labor cost when utilizing the quick and simple sheeting and cutting process of the ACME 330D.The 330D model is made in both Left to Right and Right to Left operation.  * The photo shown is a Right to Left model where the adjustments are on the (Right) side of the sheeter, the operator moves to the left to move toward the cutter. The infeed conveyor moves dough to sheeting rollers, as the dough is formed into a consistent thickness for cutting. Stainless Steel construction with heavy duty sealed bearings. Variable speed drive for the conveyor belts and the cutter allowing the operator to control the speed of the sheeter. The sheeter comes with the cutting station, dough guide on the infeed table and the flour reserve bin. The cutting conveyor speed range is 1-38 cm/ sec or 2-20 feet per minute. The ACME 330D utilizes a .75 Horsepower motor @ .56KW.  Shipping Weight is 950 LBS.  Electrical - 200-240, 50/60HZ Single Phase 3.8 Amps or 100-120V, 50/60 Hz, Single Phase 3.8 Amps. Product ships directly from the manufacturer 

* Includes Doughnut Cutter Assembly for the 26" Shaft Rotary Cutters- * Left to Right production indicates that you are standing at the front (where dough has been cut) of the machine looking to the back of the machine (where the rollers are placed) and you will be working the dough from the left side of the machine. This will have the dough roller adjustment controls and belt speed on the left side of the machine. (Photo has controls on the right side) The Model 330DD Donut Production Table only requires 96" floor space. This space saving design provides many options for operator floor plan design. The donut production table eliminates slow and ununiform production of hand cut donuts. The 330DD quickly pays for itself due to the reduction of labor cost when utilizing the quick and simple sheeting and cutting process of the ACME 330DD.The 330DD model is made in both Left to Right and Right to Left operation.  * The photo shown is a Right to Left model where the adjustments are on the (Right) side of the sheeter, the operator moves to the left to move toward the cutter. The infeed conveyor moves dough to sheeting rollers, as the dough is formed into a consistent thickness for cutting. Stainless Steel construction with heavy duty sealed bearings. Variable speed drive for the conveyor belts and the cutter allowing the operator to control the speed of the sheeter. The sheeter comes with the cutting station, dough guide on the infeed table and the flour reserve bin. The cutting conveyor speed range is 1-38 cm/ sec or 2-20 feet per minute. The ACME 330D utilizes a .75 Horsepower motor @ .56KW.  Shipping Weight is 1050 LBS.  Electrical - 200-240, 50/60HZ Single Phase 3.8 Amps or 100-120V, 50/60 Hz, Single Phase 3.8 Amps. Product ships directly from the manufacturer 

Already have a LVO SM224 Dough Sheeter but don't have the cutter attachment. The Cutter carriage is designed to work with all LVO SM224 series, 6,9,12,15,or 18 feet sheeters. The LVO cutter carriage is designed to be used with 26" shaft Rotary cutters. The Cutter Carriage is designed to easily remove when not needed.   LVO Cutter Carriage for SM224 Dough production tables.  Carriage Only Cutter Sold Separately

* Includes Doughnut Cutter Assembly for the 26" Shaft Rotary Cutters- * Right to Left production indicates that you are standing at the front (where dough has been cut) of the machine looking to the back of the machine (where the rollers are placed) and you will be working the dough from the Right side of the machine. This will have the dough roller adjustment controls and belt speed on the Right side of the machine. (Photo has controls on the right side) Other Sizes are available not shown- The LVO SM224-9 A Production table that enables the infeed conveyor belt to carry the dough to the sheeting rollers where it is sheeted in two gradual stages When used as a Donut Production table for yeast fried goods, the dough is sheeted and cut with cutters automatically and uniformly. Rotary cutters are available for donuts, bismarks, long johns, croissants and turnovers. You can also sheet basic sweet dough, danish and puff pastry. LVO Manufacturing Inc. warrants equipment manufactured by it to be free from defects in material and workmanship for a period of one (1) year from date of delivery.FEATURES: Heavy Duty Stainless Steel Construction 9 ft. conveyor table Ease of clean-up promotes a sanitary environment Stainless Steel Curling Chains - light & heavy Stainless Steel Dough Guides, adjustable Two sets of cast nylon rollers - positive adjustment Stainless Steel Scrapers - easily removed for cleaning, no tools required Electronic Speed Control Rubberized Conveyor Belt - FDA Compliant Material On/Off Stations located on either side of machine 20' Electrical Cord Cutter Carriage removable when not in use Cutter Storage Hanger for each cutter SPECIFICATIONS: Four 4" Dia. Casters - all locking type 1 HP Motor, 115V, 60 Hz, 10 Amp Equipped with Automatic Roller Safety Switch - lift the bar and motor shuts off. The displayed moulder must be ordered separately- call 918-739-4380 Overall Dimensions Width 35 Height 54 ¼ Table Height 35 ½ Depth (Standard 9 Table)  11 (12 with Catch Tray) Electrical Information 115 Volt Full Load Amps 10.0 230 Volt Full Load Amps 5.0 DIMENSIONS: 10' 4" (124") L x 54 1/4" H x 36" W

* Includes Doughnut Cutter Assembly for the 26" Shaft Rotary Cutters- * Left to Right production indicates that you are standing at the front (where dough has been cut) of the machine looking to the back of the machine (where the rollers are placed) and you will be working the dough from the left side of the machine. This will have the dough roller adjustment controls and belt speed on the left side of the machine. (Photo has controls on the right side) Other Sizes are available not shown- The LVO SM224-9 A Production table that enables the infeed conveyor belt to carry the dough to the sheeting rollers where it is sheeted in two gradual stages When used as a Donut Production table for yeast fried goods, the dough is sheeted and cut with cutters automatically and uniformly. Rotary cutters are available for donuts, bismarks, long johns, croissants and turnovers. You can also sheet basic sweet dough, danish and puff pastry. LVO Manufacturing Inc. warrants equipment manufactured by it to be free from defects in material and workmanship for a period of one (1) year from date of delivery.FEATURES: Heavy Duty Stainless Steel Construction 9 ft. conveyor table Ease of clean-up promotes a sanitary environment Stainless Steel Curling Chains - light & heavy Stainless Steel Dough Guides, adjustable Two sets of cast nylon rollers - positive adjustment Stainless Steel Scrapers - easily removed for cleaning, no tools required Electronic Speed Control Rubberized Conveyor Belt - FDA Compliant Material On/Off Stations located on either side of machine 20' Electrical Cord Cutter Carriage removable when not in use Cutter Storage Hanger for each cutter SPECIFICATIONS: Four 4" Dia. Casters - all locking type 1 HP Motor, 115V, 60 Hz, 10 Amp Equipped with Automatic Roller Safety Switch - lift the bar and motor shuts off. The displayed moulder must be ordered separately- call 918-739-4380 Overall Dimensions Width 35 Height 54 ¼ Table Height 35 ½ Depth (Standard 9 Table) 116 (124 with Catch Tray) Electrical Information 115 Volt Full Load Amps 10.0 230 Volt Full Load Amps 5.0 DIMENSIONS: 10' 4" (124") L x 54 1/4" H x 36" W

* Includes Doughnut Cutter Assembly for the 26" Shaft Rotary Cutters- * Right to Left production indicates that you are standing at the front (where dough has been cut) of the machine looking to the back of the machine (where the rollers are placed) and you will be working the dough from the Right side of the machine. This will have the dough roller adjustment controls and belt speed on the Right side of the machine. (Photo has controls on the right side) Other Sizes are available not shown- The LVO SM224-6 A Production table that enables the infeed conveyor belt to carry the dough to the sheeting rollers where it is sheeted in two gradual stages When used as a Donut Production table for yeast fried goods, the dough is sheeted and cut with cutters automatically and uniformly. Rotary cutters are available for donuts, bismarks, long johns, croissants and turnovers. You can also sheet basic sweet dough, danish and puff pastry. LVO Manufacturing Inc. warrants equipment manufactured by it to be free from defects in material and workmanship for a period of one (1) year from date of delivery.FEATURES: Heavy Duty Stainless Steel Construction 6 ft. conveyor table Ease of clean-up promotes a sanitary environment Stainless Steel Curling Chains - light & heavy Stainless Steel Dough Guides, adjustable Two sets of cast nylon rollers - positive adjustment Stainless Steel Scrapers - easily removed for cleaning, no tools required Electronic Speed Control Rubberized Conveyor Belt - FDA Compliant Material On/Off Stations located on either side of machine 20' Electrical Cord Cutter Carriage removable when not in use Cutter Storage Hanger for each cutter SPECIFICATIONS: Four 4" Dia. Casters - all locking type 1 HP Motor, 115V, 60 Hz, 10 Amp Equipped with Automatic Roller Safety Switch - lift the bar and motor shuts off. The displayed molder must be ordered separately- call 918-739-4380 Overall Dimensions Width 35 Height 54 ¼ Table Height 35 ½ Depth (Standard 6  Table) 81 (90 with Catch Tray) Electrical Information 115 Volt Full Load Amps 10.0 230 Volt Full Load Amps 5.0 DIMENSIONS: 7' 4" (88") L x 54 1/4" H x 36" W

* Includes Doughnut Cutter Assembly for the 26" Shaft Rotary Cutters- * Left to Right production indicates that you are standing at the front (where dough has been cut) of the machine looking to the back of the machine (where the rollers are placed) and you will be working the dough from the left side of the machine. This will have the dough roller adjustment controls and belt speed on the left side of the machine. (Photo has controls on the right side) Other Sizes are available not shown- The LVO SM224-6 A Production table that enables the infeed conveyor belt to carry the dough to the sheeting rollers where it is sheeted in two gradual stages When used as a Donut Production table for yeast fried goods, the dough is sheeted and cut with cutters automatically and uniformly. Rotary cutters are available for donuts, bismarks, long johns, croissants and turnovers. You can also sheet basic sweet dough, danish and puff pastry. LVO Manufacturing Inc. warrants equipment manufactured by it to be free from defects in material and workmanship for a period of one (1) year from date of delivery.FEATURES: Heavy Duty Stainless Steel Construction 6 ft. conveyor table Ease of clean-up promotes a sanitary environment Stainless Steel Curling Chains - light & heavy Stainless Steel Dough Guides, adjustable Two sets of cast nylon rollers - positive adjustment Stainless Steel Scrapers - easily removed for cleaning, no tools required Electronic Speed Control Rubberized Conveyor Belt - FDA Compliant Material On/Off Stations located on either side of machine 20' Electrical Cord Cutter Carriage removable when not in use Cutter Storage Hanger for each cutter SPECIFICATIONS: Four 4" Dia. Casters - all locking type 1 HP Motor, 115V, 60 Hz, 10 Amp Equipped with Automatic Roller Safety Switch - lift the bar and motor shuts off. The displayed molder must be ordered separately- call 918-739-4380 Overall Dimensions Width 35 Height 54 ¼ Table Height 35 ½ Depth (Standard 6 Table)  81 (90 with Catch Tray) Electrical Information 115 Volt Full Load Amps 10.0 230 Volt Full Load Amps 5.0 DIMENSIONS: 7' 4" (88") L x 54 1/4" H x 36" W