sale
734CG Donut Fryer Natural Gas Electronic Controller 120V 734CG Donut Fryer Natural Gas Electronic Controller 120V
Belshaw
734CG Donut Fryer Natural Gas Electronic Controller 120V from $12,100.00 $13,110.00
Gas-heated, Frying Area 34 x 24 inches (86 x 61 cm)  This industry-standard donut fryer is used by donut shops and bakeries all over North America and the world! Trusted by the industry for its durability, longevity, and variety of accessors for all your donut and frying needs. The fryer holds 48 standard-size cake or yeast-raised donuts and has a capacity of approximately 100-135 (avg) dozen donuts/hour. The standard 734CG model uses an electrical source for electronic ignition. 734FG model does not require an electrical connection. Product Details Frying Area 34 inches side-to-side, 24 inches front-to-back (86 x 61 cm) Gas heated at 89,000 BTU/hr Shortening capacity 215 lbs by weight, 29 gallons by volume (98 kg/110 liters) Capacity 48 standard donuts, approximately 120-150 dozen donuts per hour Natural Gas or Liquid Propane (specify when ordering). A conversion kit is available if the changeover is needed 120 Volts, 50/60Hz, 1-phase. Digital electronic thermostat control Drain tray on right side of the fryer. Can be moved to the left side Drain and valve with an exterior handle to empty shortening 2 cake donut frying screens with handles ETL certified to NSF-4, ANSI Z83.11a, and CSA1.8a.2004 (Optional) Standing pilot ignition and thermocouple temperature control “ no electricity required. This model is designated: 734FG A ventilation and fire suppression hood is usually required for indoor locations. No Electrical power connection Standing pilot ignition Thermostat temperature control  High-Temperature shut-off switch set to approximately 450F(230C) Stainless steel cabinet, kettle, and drain tray, with the sloping surface around fryer kettle. Adjustable, bolt-down legs. Disclaimer *Accessories sold separately  *This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary. * 1-year parts and labor cost limited warranty see (attached media)
sale
734FG Donut Fryer Natural Gas Standing Pilot (No Power) 734FG Donut Fryer Natural Gas Standing Pilot (No Power)
Belshaw
734FG Donut Fryer Natural Gas Standing Pilot (No Power) from $11,600.00 $13,110.00
Gas-heated, Frying Area 34 x 24 inches (86 x 61 cm) This industry-standard donut fryer is used by donut shops and bakeries all over North America and the world! Trusted by the industry for its durability, longevity, and variety of accessors for all your donut and frying needs. The fryer holds 48 standard size cake or yeast-raised donuts and has a capacity of approximately 100-135 (avg) dozen donuts/hour @ 120 seconds of frying time. The standard 734CG model uses an electrical source for electronic ignition. 734FG model does not require an electrical connection. Product Details Frying Area 34 inches side-to-side, 24 inches front-to-back (86 x 61 cm) Gas heated at 89,000 BTU/hr Shortening capacity 215 lbs by weight, 29 gallons by volume (98 kg/110 liters) Capacity 48 standard donuts, approximately 120-150 dozen donuts per hour Natural Gas or Liquid Propane (specify when ordering). A conversion kit is available if changeover is needed 120 Volts, 50/60Hz, 1-phase. Digital electronic thermostat control Drain tray on the right side of the fryer. Can be moved to the left side Drain and valve with an exterior handle to empty shortening 2 cake donut frying screens with handles ETL certified to NSF-4, ANSI Z83.11a, and CSA1.8a.2004 (Optional) Standing pilot ignition and thermocouple temperature control “ no electricity required. This model is designated: 734FG A ventilation and fire suppression hood is usually required for indoor locations. No Electrical power connection Standing pilot ignition Thermostat temperature control  High-Temperature shut-off switch set to approximately 450F(230C) Stainless steel cabinet, kettle, and drain tray, with the sloping surface around fryer kettle. Adjustable, bolt-down legs.  Disclaimer *Accessories sold separately  *This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary. * 1-year parts and labor cost limited warranty see (attached media)
15% sale
Belshaw Ez Melt 34 (Includes Rinse Hose Only)
Belshaw
Belshaw Ez Melt 34 (Includes Rinse Hose Only) $6,100.00 $5,290.00
Belshaw EZ Melt 34 (Includes Rinse Hose Only)   THE BEST FILTRATION SYSTEM FOR 734CG, 734FG, MELTS, FILTERS, AND PUMPS BACK ON DEMAND.  Compatible with 734CG and 734FG fryers, and Donut Robot® Mark VI. The EZMelt filtration system is the only filtration system recommended if you use Trans Fat-free shortening. The EZMelt34 is a recycling filter that heats shortening in the tank, with these benefits: If Zero Trans Fat shortenings are used, they gradually become thicker at normal bakery temperatures. This can lead to pump blockages and failures with standard filters. Using the heated EZ Melt overcomes this problem. Pumping reheated shortening through a fixed connection to the fryer is faster and safer than any other method, such as dropping in shortening blocks. The EZMelt does this using a refill hose (optional) which attaches directly to a Belshaw fryer. Standard features: Capacity 31.25 gallons (118 Liters), approximately equivalent to 225 lbs (102 kg) shortening. Compatible with Belshaw's floor model 734LFG and 734LCG fryers, and with Donut Robot® Mark VI. For other brand fryers, check capacity and dimensions to determine compatibility. Can be used with any standard donut shortening including Zero Trans Fat shortening. Heating element with factory set thermostat to 225‚°F/107‚°C. Element tilts up for easy tank cleaning. The tank itself is readily removable. Long-life synthetic filter screen that needs only annual replacement under normal operating conditions.Heavy-duty pump & motor for pumping shortening to the fryer on demand. Heavy-duty, moisture repellent foot switch for activating the pump. Cube cutter for fast melting of solid shortening blocks up to 50lbs (22.7kg)Handheld rinse hose with heat resistant handle. Optional Refill Hose - allows regular topping up of fryer through a fixed connection to the fryer. The refill hose can be left in place on a Belshaw fryer at all times allowing frequent topping up of shortening level. High-temperature limit switch. 120V or 240V, 50 or 60 Hz, 1-Phase. Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889. Product Details Heats shortening to 225 F or 107 C Works with long-life synthetic filter screen replacement recommended once per year under normal conditions Pumps shortening to the fryer on demand Refill shortening with the push of the foot pedal Two hoses connected to the unit fill hose and rinse hose Comes with cub cutter for fast melting of solid shortening block up to 50lbs(22.7kg) Attached mobile casters for easy movement 120v or 240v,50 or60hz ,1-phase   Disclaimer *This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary. * 1-year parts and labor cost limited warranty (see attached media)
-12% sale
belshaw-ez-melt-34-includes-rinse-and-fill-hoses belshaw-ez-melt-34-includes-rinse-and-fill-hoses
Belshaw Adamatic
belshaw-ez-melt-34-includes-rinse-and-fill-hoses $6,100.00 $6,900.00
THE BEST FILTRATION SYSTEM FOR 734CG, 734FG, MELTS, FILTERS AND PUMPS BACK ON DEMAND. Compatible with 734CG and 734FG fryers, and Donut Robot ® Mark VI. The EZMelt filtration system is the only filtration system recommended if you use Trans Fat-free shortening. The EZMelt34 is a recycling filter that heats shortening in the tank, with these benefits:If Zero Trans Fat shortenings are used, they gradually become thicker at normal bakery temperatures. This can lead to pump blockages and failures with standard filters. Using the heated EZ Melt overcomes this problem.Pumping reheated shortening through a fixed connection to the fryer is faster and safer than any other method, such as dropping in shortening blocks. The EZMelt does this using a refill hose (optional) which attaches directly to a Belshaw fryer. Standard features: Capacity 31.25 gallons (118 Liters), approximately equivalent to 225 lbs (102 kg) shortening. Compatible with Belshaw's floor model 734LFG and 734LCG fryers, and with Donut Robot ® Mark VI. For other brand fryers, check capacity and dimensions to determine compatibility.Can be used with any standard donut shortening including Zero Trans Fat shortening. Heating element with factory set thermostat to 225‚ °F/107‚ °C. Element tilts up for easy tank cleaning. Tank itself is readily removable. Long-life synthetic filter screen that needs only annual replacement under normal operating conditions.Heavy duty pump & motor for pumping shortening to the fryer on demand. Heavy duty, moisture repellent foot switch for activating pump. Cube cutter for fast melting of solid shortening blocks up to 50lbs (22.7kg)Hand held rinse hose with heat resistant handle. Optional Refill Hose - allows regular topping up of fryer through a fixed connection to the fryer. The refill hose can be left in place on a Belshaw fryer at all times allowing frequent topping up of shortening level. High-temperature limit switch. 120V or 240V, 50 or 60 Hz, 1-Phase. Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889.
Belshaw SF34 Filter includes rinse hose only
Belshaw
Belshaw SF34 Filter includes rinse hose only $5,500.00
SF34 Shortening Filter Filters shortening from 734CG and 734FG fryers. Not recommended for trans-fat free shortening. Compatible with 734CG and 734FG fryers. Not recommended for trans-fat free shortening - this type of shortening becomes solid very quickly and can cause pump blockages. Uses a long-life synthetic filter screen that needs only annual replacement under normal operating conditions Heavy duty pump and motor for pumping back shortening to the fryer after filtering Foot pedal switch for activating pump Includes hand held rinse hose for rinsing debris from bottom of fryer and for refilling fryer Slides under compatible floor and tabletop fryers Heavy duty stainless steel frame, tank and casters Shortening reservoir is removable for periodic cleaning SF Shortening Filters are not designed for Zero Trans Fat shortenings. These shortenings solidify as they cool down, sometimes causing blockages in the filter pump. Belshaw recommends the EZMelt34 Melter-Filter for Zero Trans Fat shortenings. The EZMelt contains a heating element to liquefy any shortening. 120V or 240V, 50 or 60 Hz, 1-Phase Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889
sale
Draft Inducer Kit For Gas or Propane Fryers 718L ,724, 734 Used Above 3000ft Altitude Draft Inducer Kit For Gas or Propane Fryers 718L ,724, 734 Used Above 3000ft Altitude
Belshaw
Draft Inducer Kit For Gas or Propane Fryers 718L ,724, 734 Used Above 3000ft Altitude from $2,151.00 $9,372.50
DRAFT INDUCER KIT FOR GAS FRYERS For Propane heated fryers, and Natural Gas above 3,000 feet. Available in 3 sizes and Voltages. The draft inducer ensures that gas combustion exhaust is vented through the exhaust flue at the back of your fryer so that air quality is not compromised. It's recommended for all 718L, 724 and 734 gas open kettle fryers that are heated with Propane, and for Natural Gas heated fryers located 3,000 feet ( 915 meters) or more in altitude. The Draft Inducer is pre-installed for new equipment, or can be added by a technician. 
-6% sale
33
Belshaw Adamatic
33" x 23" Screen With Handles made by Belshaw $412.55 $438.27
33" x 23" Screen With Handles made by Belshaw • High quality plated finish w/ Electroless Nickel .0005 • 4-mesh #18 wire • All welded intersections • For proofing and frying donuts and similar products Belshaw Adamatic by Unisource Frying Screen with Handles for 634/734 Fryers 34" x 24" is perfect for your establishment.
-16% sale
Belshaw 33 x 23 inches Fry Screen. Used for proofing and frying.
Belshaw Adamatic
Belshaw 33 x 23 inches Fry Screen. Used for proofing and frying. $126.04 $148.70
Proofing and Frying Screens are standard screens without handles. They are mostly used for yeast-raised donuts in situations where screens with handles will not fit easily into a proofer. To raise and lower these screens, use Detachable Screen Handles (634-0013A) For 634, 734 Fryers. 12 to 36 screens needed per fryer, depending on usage.
sale
Submerger Screens For Belshaw Gas  Donut Fryers (3 Options)
Federal
Submerger Screens For Belshaw Gas Donut Fryers (3 Options) from $720.00 $805.00
SUBMERGER SCREEN FOR GAS FRYERS Submerges products below the shortening. Available in 3 sizes. Available in 3 sizes to fit Belshaw Open Kettle fryers 718L, 724 and 734 (CG and FG models). It holds any fried product below the shortening. It is hinged to the back of the fryer and swings down to submerge any product. When not in use, it stays securely in a vertical position. Use the submerger for any products that need to fry completely under the shortening, either part time or full time. These include ball shaped donuts, loukoumades, and hushpuppies. The Submerger Screen is optional with new fryers. The photo is of the 718 Submerge Screen, the other 2 sizes will be shaped proportionate to the size of fryer the submerger is being ordered for.   Part #718LG-1541 Submerger screen for 718LCG, 718LFG, 17 x 25 inches Part #724G-1547 Submerger screen for 724CG, 724FG, 23 x 23 inches Part #734G-1536 Submerger screen for 734CG, 734FG, 33 x 23 inches  
-8% sale
Belshaw Belshaw
Belshaw
Belshaw "Large" filter bag for SF34/ EZMelt 34 $212.00 $230.00
Belshaw "Large" filter bag for SF34/ EZMelt 34 The Belshaw Large filter bag is a great way to keep your shortening oil clean and safe from debris extending the life of your shortening. The bag is made to easily attach to the frame for a quick switch out. The bag is supplied standard with new Filtration Systems but it is wise to have a backup. This is also the replacement after your filter's First Year. Polypropylene filter bag designed for one year of use under normal conditions if properly handled. Belshaw Adamatic Replacement Filter Bag for the SF34 or the EZMelt 34, is perfect for your establishment.
SS Fry Screen Cradle for 33
Venus
SS Fry Screen Cradle for 33" x 23" $381.17
This Screen Cradle will raise and lower 33" x 23" screens into the fryer. When frying cake or raised donuts, it's an alternative to using detachable screen handles. Made of 14 gauge Stainless Steel In the United States