FILTERS SHORTENING FROM 624 AND 724CG/FG FRYERS. NOT RECOMMENDED FOR TRANS-FAT FREE SHORTENING. Compatible with 624, 724CG and 724FG fryers. Not recommended for trans-fat free shortening - this type of shortening becomes solid very quickly and can cause pump blockages. Uses a long-life synthetic filter screen that needs only annual replacement under normal operating conditions Heavy duty pump and motor for pumping back shortening to the fryer after filtering Foot pedal switch for activating pump Includes hand held rinse hose for rinsing debris from bottom of fryer and for refilling fryer Slides under compatible floor and tabletop fryers Heavy duty stainless steel frame, tank and casters Shortening reservoir is removeable for periodic cleaning SF Shortening Filters are not designed for Zero Trans Fat shortenings. These shortenings solidify as they cool down, sometimes causing blockages in the filter pump. Belshaw recommends the EZMelt24 Melter-Filter for Zero Trans Fat shortenings. The EZMelt contains a heating element to liquify any shortening. 120V or 240V, 50 or 60 Hz, 1-Phase Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889

SF34 Shortening Filter Filters shortening from 734CG and 734FG fryers. Not recommended for trans-fat free shortening. Compatible with 734CG and 734FG fryers. Not recommended for trans-fat free shortening - this type of shortening becomes solid very quickly and can cause pump blockages. Uses a long-life synthetic filter screen that needs only annual replacement under normal operating conditions Heavy duty pump and motor for pumping back shortening to the fryer after filtering Foot pedal switch for activating pump Includes hand held rinse hose for rinsing debris from bottom of fryer and for refilling fryer Slides under compatible floor and tabletop fryers Heavy duty stainless steel frame, tank and casters Shortening reservoir is removable for periodic cleaning SF Shortening Filters are not designed for Zero Trans Fat shortenings. These shortenings solidify as they cool down, sometimes causing blockages in the filter pump. Belshaw recommends the EZMelt34 Melter-Filter for Zero Trans Fat shortenings. The EZMelt contains a heating element to liquefy any shortening. 120V or 240V, 50 or 60 Hz, 1-Phase Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889

FILTERS SHORTENING FROM 618L, 718LCG AND 718LFG FRYERS. NOT RECOMMENDED FOR TRANS-FAT FREE SHORTENING. Compatible with 618L, 718LCG and 718LFG fryers. Not recommended for trans-fat free shortening - this type of shortening becomes solid very quickly and can cause pump blockages. Uses a long-life synthetic filter screen that needs only annual replacement under normal operating conditions Heavy duty pump and motor for pumping back shortening to the fryer after filtering Foot pedal switch for activating pump Includes hand held rinse hose for rinsing debris from bottom of fryer and for refilling fryer Slides under compatible floor and table top fryers Heavy duty stainless steel frame, tank and casters Shortening reservoir is removeable for periodic cleaning SF Shortening Filters are not designed for Zero Trans Fat shortenings. These shortenings solidify as they cool down, sometimes causing blockages in the filter pump. Belshaw recommends the EZMelt18 Melter-Filter for Zero Trans Fat shortenings. The EZMelt contains a heating element to liquify any shortening. 120V or 240V, 50 or 60 Hz, 1-Phase Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889

THE BEST FILTRATION SYSTEM FOR 618, 718LCG-LFG, DONUT ROBOT MARK 2, 2GP, 5, 5GP. WARMS, FILTERS, REFILLS ON DEMAND. Compatible with 618L, 718LCG and 718LFG fryers, Donut Robot ® Mark II, and Donut Robot ® Mark V. The EZMelt filtration system is the only filtration system recommended if you use Trans Fat-free shortening! The EZMelt18 is a recycling filter that heats shortening in the tank, with these benefits: If Zero Trans Fat shortenings are used, they gradually become thicker at normal bakery temperatures. This can lead to pump blockages and failures with standard filters. Using the heated EZ Melt overcomes this problem. Pumping reheated shortening through a fixed connection to the fryer is faster and safer than any other method, such as dropping in shortening blocks. The EZMelt does this using a refill hose (optional) which attaches directly to a Belshaw fryer. Standard features Compatible with 618L, 718LCG and 718LFG fryers, Donut Robot ® Mark II, and Donut Robot ® Mark V. Can be used with any standard donut shortening including Zero Trans Fat shortening Heating element with factory set thermostat to 225 °F/107 °C. Element tilts up for easy tank cleaning. Tank itself is readily removeable. Long-life synthetic filter screen that needs only annual replacement under normal operating conditions. Heavy duty pump & motor for pumping shortening to the fryer on demand Heavy duty, moisture repellent foot switch for activating pump Cube cutter for fast melting of solid shortening blocks up to 50lbs (22.7kg) Hand held rinse hose with heat resistant handle Optional Refill Hose - allows regular topping up of fryer through a fixed connection to the fryer. The refill hose can be left in place on a Belshaw fryer at all times allowing frequent topping up of shortening level (purchased separately, see accessories) High-temperature limit switch 120V or 240V, 50 or 60 Hz, 1-Phase Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889

THE BEST FILTRATION SYSTEM FOR 624 AND 724CG/FG FRYERS. MELTS, FILTERS AND PUMPS BACK ON DEMAND. Compatible with 624, 724CG and 724FG fryers. The EZMelt filtration system is the only filtration system recommended if you use Trans Fat-free shortening. The EZMelt24 is a recycling filter that heats shortening in the tank, with the following benefits: If Zero Trans Fat shortenings are used, they gradually become thicker at normal bakery temperatures. This can lead to pump blockages and failures with standard filters. Using the heated EZ Melt overcomes this problem. Pumping reheated shortening through a fixed connection to the fryer is faster and safer than any other method, such as dropping in shortening blocks. The EZMelt does this using a refill hose (optional) which attaches directly to a Belshaw fryer. Standard features Compatible with Belshaw's open kettle 624, 724CG and 724FG fryers. Can be used with any standard donut shortening including Zero Trans Fat shortening Heating element with factory set thermostat to 225 °F/107 °C. Element tilts up for easy tank cleaning. Tank itself is readily removable. Long-life synthetic filter screen that needs only annual replacement under normal operating conditions. Heavy duty pump & motor for pumping shortening to the fryer on demandHeavy duty, moisture repellent foot switch for activating pump Cube cutter for fast melting of solid shortening blocks up to 50lbs (22.7kg) Hand held rinse hose with heat resistant handle Optional Refill Hose - allows regular topping up of fryer through a fixed connection to the fryer. The refill hose can be left in place on a Belshaw fryer at all times allowing frequent topping up of shortening level High-temperature limit switch Stainless steel frame, tank and casters 120V or 240V, 50 or 60 Hz, 1-Phase Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889

THE BEST FILTRATION SYSTEM FOR 734CG, 734FG, MELTS, FILTERS AND PUMPS BACK ON DEMAND. Compatible with 734CG and 734FG fryers, and Donut Robot ® Mark VI. The EZMelt filtration system is the only filtration system recommended if you use Trans Fat-free shortening. The EZMelt34 is a recycling filter that heats shortening in the tank, with these benefits:If Zero Trans Fat shortenings are used, they gradually become thicker at normal bakery temperatures. This can lead to pump blockages and failures with standard filters. Using the heated EZ Melt overcomes this problem.Pumping reheated shortening through a fixed connection to the fryer is faster and safer than any other method, such as dropping in shortening blocks. The EZMelt does this using a refill hose (optional) which attaches directly to a Belshaw fryer. Standard features: Capacity 31.25 gallons (118 Liters), approximately equivalent to 225 lbs (102 kg) shortening. Compatible with Belshaw's floor model 734LFG and 734LCG fryers, and with Donut Robot ® Mark VI. For other brand fryers, check capacity and dimensions to determine compatibility.Can be used with any standard donut shortening including Zero Trans Fat shortening. Heating element with factory set thermostat to 225‚ °F/107‚ °C. Element tilts up for easy tank cleaning. Tank itself is readily removable. Long-life synthetic filter screen that needs only annual replacement under normal operating conditions.Heavy duty pump & motor for pumping shortening to the fryer on demand. Heavy duty, moisture repellent foot switch for activating pump. Cube cutter for fast melting of solid shortening blocks up to 50lbs (22.7kg)Hand held rinse hose with heat resistant handle. Optional Refill Hose - allows regular topping up of fryer through a fixed connection to the fryer. The refill hose can be left in place on a Belshaw fryer at all times allowing frequent topping up of shortening level. High-temperature limit switch. 120V or 240V, 50 or 60 Hz, 1-Phase. Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889.

The Filter-Flo is a dependable heavy duty siphon that extracts and filters shortening from fryers, in situations where there is no room for a built-in drain, or if your fryer has no built-in drain. A squeeze of the large bulb starts the flow which can empty a Mark II in a few minutes. A reusable cloth filter cleans as the liquid passes through. Note: the Filter-Flo requires a customer-supplied leak proof container for filtered shortening to pour into. Filter-Flo is not needed if you already have a shortening filter such as SF or EZMelt. Belshaw Adamatic Filter-Flo Siphon [DR42-1048] is perfect for your establishment.