THE QUICK, NO FUSS METHOD OF MAKING WELL FORMED CAKE DONUTS. Choose the model with 1-9/16 inch size plunger for standard size donuts, or 1-inch plunger for mini donuts The handheld Type K Donut Depositor is ideal for smaller fryers such as Belshaw Adamatic 616B. One hopper holds 5.5 lbs (2.2 kg) and turns out about 5 dozen average size donuts. 6 volume settings can be selected on the handle. Typical weight range is from 1.2 - 1.8 oz. (34 - 50g), making a variety of donut sizes possible. A consistently shaped product is delivered time after time. Type K Donut Depositor (Item #8504022) includes a 1-9/16" plunger for standard size Ring Donuts. In addition the Donut Depositor accepts 3 optional attachments to a plain plunger. These attachments divide the donut deposit into 2, 3 or 4 pieces (see the options page). The entire unit is corrosion resistant and easy to clean. The Type K Donut Depositor is NSF-certified. An convenient stand is available as an option.

For 8-section Krinkle and 'Pon De Ring' donuts. The Krinkle plunger makes 8-section donuts that are irresistible whether packaged or in a display case! This plunger is also be used for 'Pon De Ring' donuts with Mochi rice flour mix. You will need a cylinder of the same size as your plunger. If you have two plungers of the same size, you only need one cylinder. Plunger sizes, diameter (inches) 1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2 Plunger sizes, diameter (mm) 38.1, 41.3, 44.5, 47.6 or 50.8

This Olde Time Buttermilk Cake Donut Mix is the best in the industry and has been sold in the U.S. for decades. Time tested and proven to be one of the best in the industry. Sweet and excellent taste with great flavor characteristics. This mix is considered the best in the industry for making tall, good textured donuts with minimal shortening absorption. Just add water and mix to make a high yield donut. Each bag weighs 50 pounds. 4 Bag minimum Samples can be obtained in our Shortening & Mixes section. Shipping is not an issue, we will ship 200 pounds to a container load (45,000 pounds) anywhere in the contiguous U.S. for only 150.00 Flat Rate. Check out www.donut-supplies.com for more details or order here.

The Filter-Flo is a dependable heavy duty siphon that extracts and filters shortening from fryers, in situations where there is no room for a built-in drain, or if your fryer has no built-in drain. A squeeze of the large bulb starts the flow which can empty a Mark II in a few minutes. A reusable cloth filter cleans as the liquid passes through. Note: the Filter-Flo requires a customer-supplied leak proof container for filtered shortening to pour into. Filter-Flo is not needed if you already have a shortening filter such as SF or EZMelt. Belshaw Adamatic Filter-Flo Siphon [DR42-1048] is perfect for your establishment.

Stand is not included; TYPE K PANCAKE DISPENSER The Professional's favorite for accurately portioned, cleanly dispensed Pancake and Waffle batter. When it comes to making dozens, even hundreds of pancakes, Belshaw's Type K Pancake Dispenser is the professional's choice. The Type K is quick and easy to use and provides accurate portion control at a variety of sizes, from mini to extra large. Belshaw's Type K depositors are designed to be mastered by the novice in minutes. Operation is easily accomplished with minimal waste, and consistent deposits can be delivered time after time. Each pancake dispenser offers 8 size settings located on the handle. Hopper size is generous and holds about 5.5 pounds (2.5 kg). The Type K hopper is aluminum to save weight. Plunger and built-in cylinder are stainless steel for durability. The entire unit is corrosion resistant and easy to clean. The Type K Pancake Dispenser is NSF-C2 certified. A convenient holder is available as an option.   Item # 8504011 Type K Pancake Depositor

FOR FRENCH CRULLER AND FRENCH CAKE DONUTS [Size] = 1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2 (diameter in inches) Use this plunger with special French Cruller mix to make French Crullers. Use standard cake donut mix to make a 'French Cake' donut. Used with Type B and Type F depositors. Example: 7B-1009x1-7/8 ' 7B-1009x2

If you purchase or have purchased the H&1-2 or the H-1-4 then you will need extra bowls for additional icing. The extra bowls make changing out flavors and replacing the icing quick and easy. The 966-0010.A bowls are specifically designed for the Belshaw Icer and are reasonably priced.

Bag is supplied standard with new Filtration Systems but it is wise to have a back up. This is also the replacement after your filters first Year. Polypropylene filter bag designed for one year of use under normal conditions if properly handled. Belshaw Adamatic Replacement Filter Bag, Standard [SM100-0002] is perfect for your establishment. For the SF18 / SF24 / EZMelt 18 / EZMelt 24

23" x 23" Screen With Handles made by Belshaw Screens with bolt-on handles. These are for cake donuts only. (Two screens are supplied standard with each new floor model fryer). These stainless steel screens allow for quick release of cake donut batter and make the frying process easier. Quickly remove the finished product from the fryer and move to the glazer using the handles that are designed to stay cool in the fryer. The reinforced woven screen is both durable and constructed of quality materials by Belshaw. Belshaw Adamatic by Unisource Frying Screen with Handles for 624/724 Fryers 23" x 23" is perfect for your establishment. Wire mesh, nickel plated steel, welded.  

12 cone-shaped filters for your Filter Flo Siphon. Belshaw Adamatic Cloth Filter Cones for Filter-Flo [DR42-0277DZ] is perfect for your establishment

4-BOWL, WATER-WARMED ICER FOR DONUTS AND OTHER PRODUCTS Compatible with all fryers and donut systems Icing table with two 13-inch stainless steel icing bowls Bowls are gently heated by warmed water. The use of moist heat enables icings to stay in condition for longer periods. Compatible with all Belshaw Adamatic donut systems. 120V and 208-240V models available

SUPPORTS TYPE B/F DONUT DEPOSITORS The Wall Mount attaches your depositor to the wall behind your fryer. The installation must be very dependable and secure. If you move the fryer, you must re-install the Wall Mount. Product description : The Wall Mounting Kit supports Type B/F donut depositors, with precision screw for adjusting the angle of the depositor. Mounts to the wall behind your work area. The full extension of the wall mount is 42"/105cm, from the wall fixture to the actual donut drop.  

Proofing and Frying Screens are standard screens without handles. They are mostly used for yeast-raised donuts in situations where screens with handles will not fit easily into a proofer. To raise and lower these screens, use Detachable Screen Handles (616-0007C) For 624, 724CG and 724FG Fryers. 12 to 36 screens needed per fryer, depending on usage nickel chrome

Belshaw 15" x 15" Frying Screen for 616B Fryer and Cut-N-Fry SIZE 15 X 15 INCHES  Made for Belshaw 616B Fryers Proofing and Frying Screens are standard screens without handles. They are mostly used for yeast-raised donuts in situations where screens with handles will not fit easily into a proofer. To raise and lower these screens, use Detachable Screen Handles (616-0007C). 15" x 15"  donut screen-Belshaw with heavy duty welding, supporting bar around the edge, and additional bar for support Wire mesh, nickel plated steel, welded.

BELSHAW "MINI" Donut Robot Standard Hopper (Without Plunger)  With this extra Donut Robot extra "mini" Hopper (Plunger not included) You can run more flavors making your lineup by just switching to this extra hopper making your operation more streamlined by switching out hoppers for different donuts lineups, all while your operation more efficient. Plunger sold separately  MK-1024X Donut Robot standard hopper (w/o plunger)

BELSHAW 13/16 Donut Robot Standard Hopper (Without Plunger)  With this extra Donut Robot extra Standard Hopper (Plunger not included) You can run more flavors making your lineup by just switching to this extra hopper making your operation more streamlined by switching out hoppers for different donuts lineups, all while your operation more efficient. Plunger sold separately  MK-1025X1-13/16 Donut Robot standard hopper (w/o plunger)