New drip tray accessory. Keeps drips off the floor • Drip Tray. When the icer is in use, the optional Drip Tray is swung into position so it is under the donuts just after they are coated with icing.

WARMS ICING PANS READY FOR QUICK CHANGEOVER OF ICING FLAVORS Product Description The optional Heating Panel adds to the convenience of using extra icing pans with a Belshaw Adamatic HI24F Icer. In advance of swapping one flavor for another, first place the pan with the new flavor in the heating panel, and warm it up ready for use.

FOR QUICKLY ICING 36 STANDARD SIZE DONUTS Compatible with 24 x 24 inch glaze screens, for 624 and 724 fryers and Century donut production systems Belshaw's HI24F Icer provides fast, uniform icing of cake and yeast-raised donuts without the need for hands to touch the product or icing. Full screens or bun pans can be iced in less than one minute. Special skills are not needed - consistent, uniform icing can be applied by a novice. The HI24F icer accommodates glazing screens or bun pans sized up to 24 x 24 inches (61 x 61 cm). The unit can ice 36 standard size donuts at one time. It occupies little space and is moveable on casters. Icing is held in a large capacity icing pan. The icing pan is warmed by a low wattage, radiant air heating panel. Belshaw's unique donut handling system dips the donuts to the icing and produces excellent smudge-free finished products, without immersing the screen or bun pan. The finished product is ready for display immediately. Changeover to different flavors is made easier by extra icing pans and heating panels which can be stored under the icing unit. When you need to change icing flavors, you can insert a new pre-warmed icing pan. Heavy-duty construction and sound design facilitate cleaning and provide a durable product that will stand up to years of everyday use. 120V and 240V models are available.

4-BOWL, WATER-WARMED ICER FOR DONUTS AND OTHER PRODUCTS Compatible with all fryers and donut systems Icing table with two 13-inch stainless steel icing bowls Bowls are gently heated by warmed water. The use of moist heat enables icings to stay in condition for longer periods. Compatible with all Belshaw Adamatic donut systems. 120V and 208-240V models available

2-BOWL ICER FOR DONUTS AND OTHER PRODUCTS, WATER-WARMED Compatible with all fryers and donut systems Icing table with two 13-inch stainless steel icing bowls Bowls are gently heated by warmed water. The use of moist heat enables icings to stay in condition for longer periods. Compatible with all Belshaw Adamatic donut systems. 120V and 208-240V models available

Belshaw HI18F High Production Icer (2 Options in Variants) FOR QUICKLY ICING 24 STANDARD SIZE DONUTS Compatible with 17 x 25 inch glaze screens, for all 618L, 718L, and all Donut Robots Belshaw's HI-18F Icer provides fast, uniform icing of cake and yeast-raised donuts without the need for hands to touch the product or icing. Full screens or bun pans can be iced in less than one minute. Special skills are not needed - consistent, uniform icing can be applied by a novice. The HI-18F icer accommodates glazing screens or bun pans sized up to 18 x 26 inches (46 x 66 cm). The unit can ice 24 standard size donuts at one time. It occupies little space and is moveable on casters. Icing is held in a large capacity icing pan. The icing pan is warmed by a low wattage, radiant air heating panel. Belshaw's unique donut handling system dips the donuts to the icing and produces excellent smudge-free finished products, without immersing the screen or bun pan. The finished product is ready for display immediately. Changeover to different flavors is made easier by extra icing pans and heating panels which can be stored under the icing unit. When you need to change icing flavors, you can insert a new pre-warmed icing pan. Heavy-duty construction and sound design facilitate cleaning and provide a durable product that will stand up to years of everyday use.120V and 240V models are available. Disclaimer *This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary. * 1-year parts and labor cost limited warranty (see attached media)

Lids (966-0011) for the icing bowls (966-0010.A)

The optional extra icing pan is useful when using multiple icing flavors (chocolate, vanilla, strawberry, etc) on a Belshaw Adamatic HI18F Icer. Instead of emptying, cleaning, and refilling a single pan with multiple flavors, you can save large amounts of time by using one pan for each flavor. When you change icing, you can simply swap the pan for another with a different flavor.But remember that most donut icings neeed to be warm when you apply them to donuts. For that reason, when you change to a new flavor the new icing must be warmed in advance.You can do this either with an extra heating panel (see accessories), or an oven set to very low heat, with the icing covered.

If you purchase or have purchased the H&1-2 or the H-1-4 then you will need extra bowls for additional icing. The extra bowls make changing out flavors and replacing the icing quick and easy. The 966-0010.A bowls are specifically designed for the Belshaw Icer and are reasonably priced.

DONUT FINISHING CENTER Finishing table with 3 hot and 4 cool pans for icing, glaze, sugar and sprinkles. Belshaw's Donut Finishing Center (DFC) is the solution when you need to make maximum use of limited space. Icing, glazing, sugaring, sprinkling - you can do all of those and more with the DFC. It contains 3 large and 4 medium size pans. The large (1/3 size) pans are radiant air-heated and designed for warmed donut icings. The medium (1/4 size) pans are unheated and suitable for sugar, sprinkles or any other ingredient. The Donut Finishing Center expands to 74 inches wide (188 cm) with two strong extensions providing lots of working space, or a place to put screens and bun pans. When not in use, extensions can be folded down again. There are 5 storage shelf brackets underneath if you run out of room on top Product Details Made of stainless steel for long-term use  Easy to clean surfaces  Lots of space and easy to store away Castors for easy movement 40" X 48" X 54" 120v  Disclaimer *This item is not stocked in our warehouse stock and transit time may vary, if you need your items by a certain date please contact us prior to placing your order. Shipping may vary. * 1-year parts and labor cost limited warranty (see attached media)

optional extra icing pan is useful when using multiple icing flavors (chocolate, vanilla, strawberry, etc) on a Belshaw Adamatic HI24F Icer.Instead of emptying, cleaning, and refilling a single pan with multiple flavors, you can save large amounts of time by using one pan for each flavor. When you change icing, you can simply swap the pan for another with a different flavor. But remember that most donut icings neeed to be warm when you apply them to donuts. For that reason, when you change to a new flavor the new icing must be warmed in advance.You can do this either with an extra heating panel (see accessories), or an oven set to very low heat, with the icing covered.

This extra-long handle allows your staff to hold onto the paddle with two hands for greater control and leverage. Featuring a soft, flexible nylon blade that sharpens and contours to your specific application with usage, this paddle is great for conforming to curved surfaces and tight cleaning areas. You'll have no problem reaching the bottom of your largest vats and this paddle will smoothly scrape the sides to keep your ingredients mixed to perfection. Designed to withstand temperatures up to 300 degrees Fahrenheit, reach for this tool anytime you need to mix large quantities of product. It will stand up to frequent use and its smooth finished, water-proof construction allows for easy clean-up. Unlike a metal paddle, this soft nylon paddle won't mark or scratch your kettles, and it's easier to clean than a wooden paddle. Lightweight and easy to handle, this paddle will become a trusted tool in your commercial kitchen. Overall Dimensions: Length: 40" Blade Length: 7 1/2" Blade Width: 4 1/2"