-14% sale
Stainless Steel Cake Pan Rack for LVO Panwasher
LVO
Stainless Steel Cake Pan Rack for LVO Panwasher $335.00 $385.25
It cant be any easier removing crumb band baked on oil from your expensive cake pans. Load the rack full and place inside the LVO Pan washer. 7 minutes later the pans have been washed, rinsed and sanitized.
-5% sale
LVO SM224-9 Donut Production Table Sheeter Right to Left Production
LVO
LVO SM224-9 Donut Production Table Sheeter Right to Left Production $19,220.00 $20,090.50
* Includes Doughnut Cutter Assembly for the 26" Shaft Rotary Cutters- * Right to Left production indicates that you are standing at the front (where dough has been cut) of the machine looking to the back of the machine (where the rollers are placed) and you will be working the dough from the Right side of the machine. This will have the dough roller adjustment controls and belt speed on the Right side of the machine. (Photo has controls on the right side) Other Sizes are available not shown- The LVO SM224-9 A Production table that enables the infeed conveyor belt to carry the dough to the sheeting rollers where it is sheeted in two gradual stages When used as a Donut Production table for yeast fried goods, the dough is sheeted and cut with cutters automatically and uniformly. Rotary cutters are available for donuts, bismarks, long johns, croissants and turnovers. You can also sheet basic sweet dough, danish and puff pastry. LVO Manufacturing Inc. warrants equipment manufactured by it to be free from defects in material and workmanship for a period of one (1) year from date of delivery.FEATURES: Heavy Duty Stainless Steel Construction 9 ft. conveyor table Ease of clean-up promotes a sanitary environment Stainless Steel Curling Chains - light & heavy Stainless Steel Dough Guides, adjustable Two sets of cast nylon rollers - positive adjustment Stainless Steel Scrapers - easily removed for cleaning, no tools required Electronic Speed Control Rubberized Conveyor Belt - FDA Compliant Material On/Off Stations located on either side of machine 20' Electrical Cord Cutter Carriage removable when not in use Cutter Storage Hanger for each cutter SPECIFICATIONS: Four 4" Dia. Casters - all locking type 1 HP Motor, 115V, 60 Hz, 10 Amp Equipped with Automatic Roller Safety Switch - lift the bar and motor shuts off. The displayed moulder must be ordered separately- call 918-739-4380 Overall Dimensions Width 35 Height 54 ¼ Table Height 35 ½ Depth (Standard 9 Table)  11 (12 with Catch Tray) Electrical Information 115 Volt Full Load Amps 10.0 230 Volt Full Load Amps 5.0 DIMENSIONS: 10' 4" (124") L x 54 1/4" H x 36" W
-5% sale
LVO SM224-9 Donut Production Table Sheeter Left to Right Production
LVO
LVO SM224-9 Donut Production Table Sheeter Left to Right Production $19,220.00 $20,090.50
* Includes Doughnut Cutter Assembly for the 26" Shaft Rotary Cutters- * Left to Right production indicates that you are standing at the front (where dough has been cut) of the machine looking to the back of the machine (where the rollers are placed) and you will be working the dough from the left side of the machine. This will have the dough roller adjustment controls and belt speed on the left side of the machine. (Photo has controls on the right side) Other Sizes are available not shown- The LVO SM224-9 A Production table that enables the infeed conveyor belt to carry the dough to the sheeting rollers where it is sheeted in two gradual stages When used as a Donut Production table for yeast fried goods, the dough is sheeted and cut with cutters automatically and uniformly. Rotary cutters are available for donuts, bismarks, long johns, croissants and turnovers. You can also sheet basic sweet dough, danish and puff pastry. LVO Manufacturing Inc. warrants equipment manufactured by it to be free from defects in material and workmanship for a period of one (1) year from date of delivery.FEATURES: Heavy Duty Stainless Steel Construction 9 ft. conveyor table Ease of clean-up promotes a sanitary environment Stainless Steel Curling Chains - light & heavy Stainless Steel Dough Guides, adjustable Two sets of cast nylon rollers - positive adjustment Stainless Steel Scrapers - easily removed for cleaning, no tools required Electronic Speed Control Rubberized Conveyor Belt - FDA Compliant Material On/Off Stations located on either side of machine 20' Electrical Cord Cutter Carriage removable when not in use Cutter Storage Hanger for each cutter SPECIFICATIONS: Four 4" Dia. Casters - all locking type 1 HP Motor, 115V, 60 Hz, 10 Amp Equipped with Automatic Roller Safety Switch - lift the bar and motor shuts off. The displayed moulder must be ordered separately- call 918-739-4380 Overall Dimensions Width 35 Height 54 ¼ Table Height 35 ½ Depth (Standard 9 Table) 116 (124 with Catch Tray) Electrical Information 115 Volt Full Load Amps 10.0 230 Volt Full Load Amps 5.0 DIMENSIONS: 10' 4" (124") L x 54 1/4" H x 36" W
-5% sale
LVO SM224-6 Donut Production Table Sheeter Right To Left Production
LVO
LVO SM224-6 Donut Production Table Sheeter Right To Left Production $17,965.00 $18,762.25
* Includes Doughnut Cutter Assembly for the 26" Shaft Rotary Cutters- * Right to Left production indicates that you are standing at the front (where dough has been cut) of the machine looking to the back of the machine (where the rollers are placed) and you will be working the dough from the Right side of the machine. This will have the dough roller adjustment controls and belt speed on the Right side of the machine. (Photo has controls on the right side) Other Sizes are available not shown- The LVO SM224-6 A Production table that enables the infeed conveyor belt to carry the dough to the sheeting rollers where it is sheeted in two gradual stages When used as a Donut Production table for yeast fried goods, the dough is sheeted and cut with cutters automatically and uniformly. Rotary cutters are available for donuts, bismarks, long johns, croissants and turnovers. You can also sheet basic sweet dough, danish and puff pastry. LVO Manufacturing Inc. warrants equipment manufactured by it to be free from defects in material and workmanship for a period of one (1) year from date of delivery.FEATURES: Heavy Duty Stainless Steel Construction 6 ft. conveyor table Ease of clean-up promotes a sanitary environment Stainless Steel Curling Chains - light & heavy Stainless Steel Dough Guides, adjustable Two sets of cast nylon rollers - positive adjustment Stainless Steel Scrapers - easily removed for cleaning, no tools required Electronic Speed Control Rubberized Conveyor Belt - FDA Compliant Material On/Off Stations located on either side of machine 20' Electrical Cord Cutter Carriage removable when not in use Cutter Storage Hanger for each cutter SPECIFICATIONS: Four 4" Dia. Casters - all locking type 1 HP Motor, 115V, 60 Hz, 10 Amp Equipped with Automatic Roller Safety Switch - lift the bar and motor shuts off. The displayed molder must be ordered separately- call 918-739-4380 Overall Dimensions Width 35 Height 54 ¼ Table Height 35 ½ Depth (Standard 6  Table) 81 (90 with Catch Tray) Electrical Information 115 Volt Full Load Amps 10.0 230 Volt Full Load Amps 5.0 DIMENSIONS: 7' 4" (88") L x 54 1/4" H x 36" W
-5% sale
LVO SM224-6 Donut Production Table Sheeter Left To Right Production LVO SM224-6 Donut Production Table Sheeter Left To Right Production
LVO
LVO SM224-6 Donut Production Table Sheeter Left To Right Production $17,965.00 $18,762.25
* Includes Doughnut Cutter Assembly for the 26" Shaft Rotary Cutters- * Left to Right production indicates that you are standing at the front (where dough has been cut) of the machine looking to the back of the machine (where the rollers are placed) and you will be working the dough from the left side of the machine. This will have the dough roller adjustment controls and belt speed on the left side of the machine. (Photo has controls on the right side) Other Sizes are available not shown- The LVO SM224-6 A Production table that enables the infeed conveyor belt to carry the dough to the sheeting rollers where it is sheeted in two gradual stages When used as a Donut Production table for yeast fried goods, the dough is sheeted and cut with cutters automatically and uniformly. Rotary cutters are available for donuts, bismarks, long johns, croissants and turnovers. You can also sheet basic sweet dough, danish and puff pastry. LVO Manufacturing Inc. warrants equipment manufactured by it to be free from defects in material and workmanship for a period of one (1) year from date of delivery.FEATURES: Heavy Duty Stainless Steel Construction 6 ft. conveyor table Ease of clean-up promotes a sanitary environment Stainless Steel Curling Chains - light & heavy Stainless Steel Dough Guides, adjustable Two sets of cast nylon rollers - positive adjustment Stainless Steel Scrapers - easily removed for cleaning, no tools required Electronic Speed Control Rubberized Conveyor Belt - FDA Compliant Material On/Off Stations located on either side of machine 20' Electrical Cord Cutter Carriage removable when not in use Cutter Storage Hanger for each cutter SPECIFICATIONS: Four 4" Dia. Casters - all locking type 1 HP Motor, 115V, 60 Hz, 10 Amp Equipped with Automatic Roller Safety Switch - lift the bar and motor shuts off. The displayed molder must be ordered separately- call 918-739-4380 Overall Dimensions Width 35 Height 54 ¼ Table Height 35 ½ Depth (Standard 6 Table)  81 (90 with Catch Tray) Electrical Information 115 Volt Full Load Amps 10.0 230 Volt Full Load Amps 5.0 DIMENSIONS: 7' 4" (88") L x 54 1/4" H x 36" W
-14% sale
LVO Pass Through Pan Washer- Model PT-10 Electric 460 Volts 3 Phase
LVO
LVO Pass Through Pan Washer- Model PT-10 Electric 460 Volts 3 Phase $15,740.00 $18,101.00
Model PT10 Pass Through Washer Easy to operate and capable of washing up to 100 pans per hour, the LVO PT10 cleans your pot, pans, or utensils with a powerful, high pressure wash. With a 7 ½ Horsepower pump and brass wash hubs, the two rotating stainless steel spray arms blast away soil for greater cleanliness. With its two doors, each with its own table, the PT10s straight pass through design allows for one side to be used for preparation of your soiled pans and the other for your cleans pans to come out, minimizing the chance of cross contamination, while maximizing worker efficiency. Standard Features- Rinse Tank With Booster Heater, Hold Down Rack, Support Rack, Wash Selector, Digital Temp Gauges, Low Water Cut Off, Door Safety Switch, Pressure Gauges, Adjustable Legs, Pump Inlet Screen, Wash Tank Scrap Trays, 1 Year Warranty Parts & Labor, 12 Foot Clean-Up Hose With Spray Gun, ETL & NSF Certification, Pressure Regulator Valve Specifications: Wash Capacity: 10 Pans, Utensils or 140 Quart Mixing Bowl Pump: 7 ½ HP 208, 230, or 460V, 60 cycle, 3 Phase Recirculates Approximately 140 Gallons per Minute at 50-60 PSI Timers: Three Preset Wash Times Wash Tank: 30 Gallon Capacity Electric, Gas, or Steam Heated Cabinet: 14 and 12 Gauge Heavy Duty Stainless Steel Construction Rinse Tank: Stainless Steel with a 9 KW electric booster heater to boost 140 °F incoming water to 180 °F-195 °F sanitizing rinse water Wash Capacity: 10 Sheet Pans Standard Voltages: 208, 230, or 460 Volt, 3 Phase, 60 Hertz Wash Tank: Electric, Dimensions: 28 ¾W x 30 ¼H x 28 L Height with Door Open: 102 ¾ Agency Listings (US & Canada): ETL (Electrical) and NSF (Sanitation) * Detergent Feeders- This machine must be operated with an automatic detergent feeder, which is supplied by the customer, including a visual means to verify that detergent is delivered or a visual or audible alarm to signal that detergent is not available for delivery. Power for the feeder can be provided by the pump supply connection in the control panel. See feeder equipment manual for additional information. Customer must provide a forklift or a loading dock facility to unload this washer. A LVO representative will supervise installation at the rate of 400.00 a day plus expenses if required.
-14% sale
LVO Pass Through Pan Washer- Model PT-10 Electric 230 Volts
LVO
LVO Pass Through Pan Washer- Model PT-10 Electric 230 Volts $15,740.00 $18,101.00
Model PT10 Pass Through Washer Easy to operate and capable of washing up to 100 pans per hour, the LVO PT10 cleans your pot, pans, or utensils with a powerful, high pressure wash. With a 7 ½ Horsepower pump and brass wash hubs, the two rotating stainless steel spray arms blast away soil for greater cleanliness. With its two doors, each with its own table, the PT10s straight pass through design allows for one side to be used for preparation of your soiled pans and the other for your cleans pans to come out, minimizing the chance of cross contamination, while maximizing worker efficiency. Standard Features- Rinse Tank With Booster Heater, Hold Down Rack, Support Rack, Wash Selector, Digital Temp Gauges, Low Water Cut Off, Door Safety Switch, Pressure Gauges, Adjustable Legs, Pump Inlet Screen, Wash Tank Scrap Trays, 1 Year Warranty Parts & Labor, 12 Foot Clean-Up Hose With Spray Gun, ETL & NSF Certification, Pressure Regulator Valve Specifications: Wash Capacity: 10 Pans, Utensils or 140 Quart Mixing Bowl Pump: 7 ½ HP 208, 230, or 460V, 60 cycle, 3 Phase Recirculates Approximately 140 Gallons per Minute at 50-60 PSI Timers: Three Preset Wash Times Wash Tank: 30 Gallon Capacity Electric, Gas, or Steam Heated Cabinet: 14 and 12 Gauge Heavy Duty Stainless Steel Construction Rinse Tank: Stainless Steel with a 9 KW electric booster heater to boost 140 °F incoming water to 180 °F-195 °F sanitizing rinse water Wash Capacity: 10 Sheet Pans Standard Voltages: 208, 230, or 460 Volt, 3 Phase, 60 Hertz Wash Tank: Electric, Dimensions: 28 ¾W x 30 ¼H x 28 ¾L Height with Door Open: 102 ¾ Agency Listings (US & Canada): ETL (Electrical) and NSF (Sanitation) * Detergent Feeders- This machine must be operated with an automatic detergent feeder, which is supplied by the customer, including a visual means to verify that detergent is delivered or a visual or audible alarm to signal that detergent is not available for delivery. Power for the feeder can be provided by the pump supply connection in the control panel. See feeder equipment manual for additional information. Customer must provide a forklift or a loading dock facility to unload this washer. A LVO representative will supervise installation at the rate of 400.00 a day plus expenses if required.
-14% sale
LVO Pass Through Pan Washer- Model PT-10 Electric 208 Volts
LVO
LVO Pass Through Pan Washer- Model PT-10 Electric 208 Volts $15,740.00 $18,101.00
Model PT10 Pass Through Washer Easy to operate and capable of washing up to 100 pans per hour, the LVO PT10 cleans your pot, pans, or utensils with a powerful, high pressure wash. With a 7 ½ Horsepower pump and brass wash hubs, the two rotating stainless steel spray arms blast away soil for greater cleanliness. With its two doors, each with its own table, the PT10s straight pass through design allows for one side to be used for preparation of your soiled pans and the other for your cleans pans to come out, minimizing the chance of cross contamination, while maximizing worker efficiency. Standard Features- Rinse Tank With Booster Heater, Hold Down Rack, Support Rack, Wash Selector, Digital Temp Gauges, Low Water Cut Off, Door Safety Switch, Pressure Gauges, Adjustable Legs, Pump Inlet Screen, Wash Tank Scrap Trays, 1 Year Warranty Parts & Labor, 12 Foot Clean-Up Hose With Spray Gun, ETL & NSF Certification, Pressure Regulator Valve Specifications: Wash Capacity: 10 Pans, Utensils or 140 Quart Mixing Bowl Pump: 7 ½ HP 208, 230, or 460V, 60 cycle, 3 Phase Recirculates Approximately 140 Gallons per Minute at 50-60 PSI Timers: Three Preset Wash Times Wash Tank: 30 Gallon Capacity Electric, Gas, or Steam Heated Cabinet: 14 and 12 Gauge Heavy Duty Stainless Steel Construction Rinse Tank: Stainless Steel with a 9 KW electric booster heater to boost 140 °F incoming water to 180 °F-195 °F sanitizing rinse water Wash Capacity: 10 Sheet Pans Standard Voltages: 208, 230, or 460 Volt, 3 Phase, 60 Hertz Wash Tank: Electric, Dimensions: 28 ¾W x 30 ¼H x 28 ¾L Height with Door Open: 102 ¾ Agency Listings (US & Canada): ETL (Electrical) and NSF (Sanitation) * Detergent Feeders- This machine must be operated with an automatic detergent feeder, which is supplied by the customer, including a visual means to verify that detergent is delivered or a visual or audible alarm to signal that detergent is not available for delivery. Power for the feeder can be provided by the pump supply connection in the control panel. See feeder equipment manual for additional information. Customer must provide a forklift or a loading dock facility to unload this washer. A LVO representative will supervise installation at the rate of 400.00 a day plus expenses if required.
-14% sale
LVO Front Load Pan Washer- Model FL-10 Electric 460 Volts 3 Phase
LVO
LVO Front Load Pan Washer- Model FL-10 Electric 460 Volts 3 Phase $15,740.00 $18,101.00
Model FL10 Front Load Washer Capable of washing up to 100 pans per hour, the LVO FL10 cleans your pots, pans, bowls or utensils with a powerful, high pressure wash. With a 7 ½ Horsepower pump and brass wash hubs, the two rotating stainless steel spray arms blast away soil for greater cleanliness. Easy to load and operate the front load design allows for greater access to the wash chamber, while at the same time minimizing the amount of floor space required. Standard Features- Rinse Tank With Booster Heater, Hold Down Rack, Support Rack, Wash Selector, Digital Temp Gauges, Low Water Cut Off, Door Safety Switch, Pressure Gauges, Adjustable Legs, Pump Inlet Screen, Wash Tank Scrap Trays, 1 Year Warranty Parts & Labor, 12 Foot Clean-Up Hose With Spray Gun, ETL & NSF Certification, Pressure Regulator Valve Specifications: Wash Capacity: 10 Pans, Utensils or 140 Quart Mixing Bowl Pump: 7 ½ HP 208, 230, or 460V, 60 cycle, 3 Phase Recirculates Approximately 140 Gallons per Minute at 50-60 PSI Timers: Three Preset Wash Times Wash Tank: 30 Gallon Capacity Electric, Gas, or Steam Heated Cabinet: 14 and 12 Gauge Heavy Duty Stainless Steel Construction Rinse Tank: Stainless Steel with a 9 KW electric booster heater to boost 140 °F incoming water to 180 °F-195 °F sanitizing rinse water Wash Capacity: 10 Sheet Pans Standard Voltages: 208, 230, or 460 Volt, 3 Phase, 60 Hertz Wash Tank: Electric, Dimensions: 28 ¾W x 30 ¼H x 28 ¾L Height with Door Open: 102 ¾ Agency Listings (US & Canada): ETL (Electrical) and NSF (Sanitation) * Detergent Feeders- This machine must be operated with an automatic detergent feeder, which is supplied by the customer, including a visual means to verify that detergent is delivered or a visual or audible alarm to signal that detergent is not available for delivery. Power for the feeder can be provided by the pump supply connection in the control panel. See feeder equipment manual for additional information. Customer must provide a forklift or a loading dock facility to unload this washer. A LVO representative will supervise installation at the rate of 400.00 a day plus expenses if required.
-14% sale
LVO Front Load Pan Washer- Model FL-10 Electric 240 Volts
LVO
LVO Front Load Pan Washer- Model FL-10 Electric 240 Volts $15,740.00 $18,101.00
Model FL10 Front Load Washer Capable of washing up to 100 pans per hour, the LVO FL10 cleans your pots, pans, bowls or utensils with a powerful, high pressure wash. With a 7 ½ Horsepower pump and brass wash hubs, the two rotating stainless steel spray arms blast away soil for greater cleanliness. Easy to load and operate the front load design allows for greater access to the wash chamber, while at the same time minimizing the amount of floor space required. Standard Features- Rinse Tank With Booster Heater, Hold Down Rack, Support Rack, Wash Selector, Digital Temp Gauges, Low Water Cut Off, Door Safety Switch, Pressure Gauges, Adjustable Legs, Pump Inlet Screen, Wash Tank Scrap Trays, 1 Year Warranty Parts & Labor, 12 Foot Clean-Up Hose With Spray Gun, ETL & NSF Certification, Pressure Regulator Valve Specifications: Wash Capacity: 10 Pans, Utensils or 140 Quart Mixing Bowl Pump: 7 ½ HP 208, 230, or 460V, 60 cycle, 3 Phase Recirculates Approximately 140 Gallons per Minute at 50-60 PSI Timers: Three Preset Wash Times Wash Tank: 30 Gallon Capacity Electric, Gas, or Steam Heated Cabinet: 14 and 12 Gauge Heavy Duty Stainless Steel Construction Rinse Tank: Stainless Steel with a 9 KW electric booster heater to boost 140 °F incoming water to 180 °F-195 °F sanitizing rinse water Wash Capacity: 10 Sheet Pans Standard Voltages: 208, 230, or 460 Volt, 3 Phase, 60 Hertz Wash Tank: Electric, Dimensions: 28 ¾ W x 30 ¼ H x 28 ¾ L Height with Door Open: 102 ¾ Agency Listings (US & Canada): ETL (Electrical) and NSF (Sanitation) * Detergent Feeders- This machine must be operated with an automatic detergent feeder, which is supplied by the customer, including a visual means to verify that detergent is delivered or a visual or audible alarm to signal that detergent is not available for delivery. Power for the feeder can be provided by the pump supply connection in the control panel. See feeder equipment manual for additional information. Customer must provide a forklift or a loading dock facility to unload this washer. A LVO representative will supervise installation at the rate of 400.00 a day plus expenses if required.
-14% sale
LVO Front Load Pan Washer- Model FL-10 Electric 208 Volts
LVO
LVO Front Load Pan Washer- Model FL-10 Electric 208 Volts $15,740.00 $18,101.00
Model FL10 Front Load Washer Capable of washing up to 100 pans per hour, the LVO FL10 cleans your pots, pans, bowls or utensils with a powerful, high pressure wash. With a 7 ½ Horsepower pump and brass wash hubs, the two rotating stainless steel spray arms blast away soil for greater cleanliness. Easy to load and operate the front load design allows for greater access to the wash chamber, while at the same time minimizing the amount of floor space required. Standard Features- Rinse Tank With Booster Heater, Hold Down Rack, Support Rack, Wash Selector, Digital Temp Gauges, Low Water Cut Off, Door Safety Switch, Pressure Gauges, Adjustable Legs, Pump Inlet Screen, Wash Tank Scrap Trays, 1 Year Warranty Parts & Labor, 12 Foot Clean-Up Hose With Spray Gun, ETL & NSF Certification, Pressure Regulator Valve Specifications: Wash Capacity: 10 Pans, Utensils or 140 Quart Mixing Bowl Pump: 7 ½ HP 208, 230, or 460V, 60 cycle, 3 Phase  Recirculates Approximately 140 Gallons per Minute at 50-60 PSI Timers: Three Preset Wash Times Wash Tank: 30 Gallon Capacity Electric, Gas, or Steam Heated Cabinet: 14 and 12 Gauge Heavy Duty Stainless Steel Construction Rinse Tank: Stainless Steel with a 9 KW electric booster heater to boost 140 °F incoming water to 180 °F-195 °F sanitizing rinse water Wash Capacity: 10 Sheet Pans Standard Voltages: 208, 230, or 460 Volt, 3 Phase, 60 Hertz Wash Tank: Electric, Dimensions: 28 ¾ W x 30 ¼ H x 28 ¾ L Height with Door Open: 102 ¾ Agency Listings (US & Canada): ETL (Electrical) and NSF (Sanitation) * Detergent Feeders- This machine must be operated with an automatic detergent feeder, which is supplied by the customer, including a visual means to verify that detergent is delivered or a visual or audible alarm to signal that detergent is not available for delivery. Power for the feeder can be provided by the pump supply connection in the control panel. See feeder equipment manual for additional information. Customer must provide a forklift or a loading dock facility to unload this washer. A LVO representative will supervise installation at the rate of 400.00 a day plus expenses if required.
-14% sale
LVO Corner Load Pan Washer- Model CL-10 Electric 460 Volt 3 Phase
LVO
LVO Corner Load Pan Washer- Model CL-10 Electric 460 Volt 3 Phase $15,740.00 $18,101.00
Model CL10 Corner Load Washer Easy to operate and capable of washing up to 100 pans per hour, the LVO CL10 cleans your pots, pans, bowls, or utensils with a powerful, high pressure wash. With a 7 ½ Horsepower pump and brass wash hubs, the two rotating stainless steel spray arms blast away soil for greater cleanliness. With its two doors, each with its own table, the CL10 allows for one side to be used for preparation of your soiled pans and the other for you clean pans to come out, minimizing the chance of cross contamination, while maximizing worker efficiency. The L-shaped design permits the washer to be place in the corner, reducing the amount of floor space needed for operation. Standard Features- Rinse Tank With Booster Heater, Hold Down Rack, Support Rack, Wash Selector, Digital Temp Gauges, Low Water Cut Off, Door Safety Switch, Pressure Gauges, Adjustable Legs, Pump Inlet Screen, Wash Tank Scrap Trays, 1 Year Warranty Parts & Labor, 12 Foot Clean-Up Hose With Spray Gun, ETL & NSF Certification, Pressure Regulator Valve Specifications: Wash Capacity: 10 Pans, Utensils or 140 Quart Mixing Bowl Pump: 7 ½ HP 208, 230, or 460V, 60 cycle, 3 Phase  Recirculates Approximately 140 Gallons per Minute at 50-60 PSI Timers: Three Preset Wash Times Wash Tank: 30 Gallon Capacity Electric, Gas, or Steam Heated Cabinet: 14 and 12 Gauge Heavy Duty Stainless Steel Construction Rinse Tank: Stainless Steel with a 9 KW electric booster heater to boost 140 °F incoming water to 180 °F-195 °F sanitizing rinse water Wash Capacity: 10 Sheet Pans Standard Voltages: 208, 230, or 460 Volt, 3 Phase, 60 Hertz Wash Tank: Electric, Dimensions: 28 ¾ W x 30 ¼ H x 28 ¾ L Height with Door Open: 102 ¾ Agency Listings (US & Canada): ETL (Electrical) and NSF (Sanitation) * Detergent Feeders- This machine must be operated with an automatic detergent feeder, which is supplied by the customer, including a visual means to verify that detergent is delivered or a visual or audible alarm to signal that detergent is not available for delivery. Power for the feeder can be provided by the pump supply connection in the control panel. See feeder equipment manual for additional information. Customer must provide a forklift or a loading dock facility to unload this washer. A LVO representative will supervise installation at the rate of 400.00 a day plus expenses if required.
-14% sale
LVO Corner Load Pan Washer- Model CL-10 Electric 230 V
LVO
LVO Corner Load Pan Washer- Model CL-10 Electric 230 V $15,740.00 $18,101.00
Model CL10 Corner Load Washer Easy to operate and capable of washing up to 100 pans per hour, the LVO CL10 cleans your pots, pans, bowls, or utensils with a powerful, high pressure wash. With a 7 ½ Horsepower pump and brass wash hubs, the two rotating stainless steel spray arms blast away soil for greater cleanliness. With its two doors, each with its own table, the CL10 allows for one side to be used for preparation of your soiled pans and the other for you clean pans to come out, minimizing the chance of cross contamination, while maximizing worker efficiency. The L-shaped design permits the washer to be place in the corner, reducing the amount of floor space needed for operation. Standard Features- Rinse Tank With Booster Heater, Hold Down Rack, Support Rack, Wash Selector, Digital Temp Gauges, Low Water Cut Off, Door Safety Switch, Pressure Gauges, Adjustable Legs, Pump Inlet Screen, Wash Tank Scrap Trays, 1 Year Warranty Parts & Labor, 12 Foot Clean-Up Hose With Spray Gun, ETL & NSF Certification, Pressure Regulator Valve Specifications: Wash Capacity: 10 Pans, Utensils or 140 Quart Mixing Bowl Pump: 7 ½ HP  208, 230, or 460V, 60 cycle, 3 Phase  Recirculates Approximately 140 Gallons per Minute at 50-60 PSI Timers: Three Preset Wash Times Wash Tank: 30 Gallon Capacity  Electric, Gas, or Steam Heated Cabinet: 14 and 12 Gauge Heavy Duty Stainless Steel Construction Rinse Tank: Stainless Steel with a 9 KW electric booster heater to boost 140 °F incoming water to 180 °F-195 °F sanitizing rinse water Wash Capacity: 10 Sheet Pans Standard Voltages: 208, 230, or 460 Volt, 3 Phase, 60 Hertz Wash Tank: Electric, Dimensions: 28 ¾ W x 30 ¼ H x 28 ¾ L Height with Door Open: 102 ¾ Agency Listings (US & Canada): ETL (Electrical) and NSF (Sanitation) * Detergent Feeders- This machine must be operated with an automatic detergent feeder, which is supplied by the customer, including a visual means to verify that detergent is delivered or a visual or audible alarm to signal that detergent is not available for delivery. Power for the feeder can be provided by the pump supply connection in the control panel. See feeder equipment manual for additional information. Customer must provide a forklift or a loading dock facility to unload this washer. A LVO representative will supervise installation at the rate of 400.00 a day plus expenses if required.
-14% sale
LVO Corner Load Pan Washer- Model CL-10 Electric 208 V
LVO
LVO Corner Load Pan Washer- Model CL-10 Electric 208 V $15,740.00 $18,101.00
Model CL10 Corner Load Washer Easy to operate and capable of washing up to 100 pans per hour, the LVO CL10 cleans your pots, pans, bowls, or utensils with a powerful, high pressure wash. With a 7 ½ Horsepower pump and brass wash hubs, the two rotating stainless steel spray arms blast away soil for greater cleanliness. With its two doors, each with its own table, the CL10 allows for one side to be used for preparation of your soiled pans and the other for you clean pans to come out, minimizing the chance of cross contamination, while maximizing worker efficiency. The L-shaped design permits the washer to be place in the corner, reducing the amount of floor space needed for operation. Standard Features- Rinse Tank With Booster Heater, Hold Down Rack, Support Rack, Wash Selector, Digital Temp Gauges, Low Water Cut Off, Door Safety Switch, Pressure Gauges, Adjustable Legs, Pump Inlet Screen, Wash Tank Scrap Trays, 1 Year Warranty Parts & Labor, 12 Foot Clean-Up Hose With Spray Gun, ETL & NSF Certification, Pressure Regulator Valve Specifications: Wash Capacity: 10 Pans, Utensils or 140 Quart Mixing Bowl Pump: 7 ½ HP 208, 230, or 460V, 60 cycle, 3 Phase Recirculates Approximately 140 Gallons per Minute at 50-60 PSI Timers: Three Preset Wash Times Wash Tank: 30 Gallon Capacity Electric, Gas, or Steam Heated Cabinet: 14 and 12 Gauge Heavy Duty Stainless Steel Construction Rinse Tank: Stainless Steel with a 9 KW electric booster heater to boost 140 °F incoming water to 180 °F-195 °F sanitizing rinse water Wash Capacity: 10 Sheet Pans Standard Voltages: 208, 230, or 460 Volt, 3 Phase, 60 Hertz Wash Tank: Electric, Dimensions: 28 ¾ W x 30 ¼ H x 28 ¾ L Height with Door Open: 102 ¾ Agency Listings (US & Canada): ETL (Electrical) and NSF (Sanitation) * Detergent Feeders- This machine must be operated with an automatic detergent feeder, which is supplied by the customer, including a visual means to verify that detergent is delivered or a visual or audible alarm to signal that detergent is not available for delivery. Power for the feeder can be provided by the pump supply connection in the control panel. See feeder equipment manual for additional information.