734FG Donut Fryer Natural Gas Standing Pilot (No Power)

$11,400.00 $13,110.00 -14% OFF

Title

734FG Donut Fryer Natural Gas (No Power) 734FG Donut Fryer Natural Gas (No Power) with submerger 734FG Donut Fryer Natural Gas (No Power) With Draft Inducer for over 3000 ft. 734FG Donut Fryer Natural Gas (No Power) With Submerger and Draft Inducer for over 3000 ft.

734FG Donut Fryer Natural Gas Standing Pilot (No Power)

$11,400.00 $13,110.00 -14% OFF
LIMITED TIME OFFER

The price of this item will revert back to $16,010.30 at the end of this countdown.

00
days
00
hours
00
minutes
00
seconds

Products that are in stock are usually delivered in 3-7 days.

0 watching this item.

Title

734FG Donut Fryer Natural Gas (No Power) 734FG Donut Fryer Natural Gas (No Power) with submerger 734FG Donut Fryer Natural Gas (No Power) With Draft Inducer for over 3000 ft. 734FG Donut Fryer Natural Gas (No Power) With Submerger and Draft Inducer for over 3000 ft.
0 LEFT IN STOCK
Product description

Gas-heated, Frying Area 34 x 24 inches (86 x 61 cm)

This industry standard donut fryer is used by donut shops and bakeries all over North America and the world! The fryer holds 48 standard size cake or yeast-raised donuts and has a capacity of approximately 120-150 dozen donuts/hour. The standard 734CG model uses an electrical source for electronic ignition. 734FG model does not require an electrical connection.

  • Frying Area 34 inches side-to-side, 24 inches front-to-back (86 x 61 cm)
  • Gas heated at 89,000 BTU/hr
  • Shortening capacity 215 lbs by weight, 29 gallons by volume (98 kg/110 liters)
  • Capacity 48 standard donuts, approximately 120-150 dozen donuts per hour
  • Natural Gas or Liquid Propane (specify when ordering). A conversion kit is available if changeover is needed
  • 120 Volts, 50/60Hz, 1-phase.
  • Digital electronic thermostat control
  • Drain tray on right side of fryer. Can be moved to left side
  • Drain and valve with exterior handle to empty shortening
  • 2 cake donut frying screens with handles
  • ETL certified to NSF-4, ANSI Z83.11a and CSA1.8a.2004
  • (Optional) Standing pilot ignition and thermocouple temperature control no electricity required. This models is designated: 734FG